install doubt

[john]

Hi Antonello,

Your guess is as good as mine. But it doesn't really matter since you
can always change it later. If you are using Ubuntu 6.06 I think
you're probably using ltsp 4.2. If so after you're setup you can go to
a command line and type:

sudo ltspadmin

That will start the ltspadmin program. From there you can examine your
options and change them very easily. You want the nic that says
192.168.0.254 to serve dhcp to your ltsp clients and the other nic to
go to the internet. It should look something like this when you have
it set up.

nterface IP Address      Netmask         Network         Broadcast        Used
eth0      192.168.0.254   255.255.255.0   192.168.0.0     192.168.0.255   <-----
eth1      10.110.0.105    255.255.0.0     10.110.0.0      10.110.255.255

I hope this helps.

John



On 6/23/07, Antonello Facchetti <antonello.facchetti at alice.it> wrote:
> I'm installing edubuntu 6.06 as an ltsp server.
> The pc has got two nics, one for the terminals and the other to access
> to the internet.
> The installaton procedure asks to configure the so-called "main ethernet
> card", but I can't figure out which one of the nics is the "main" nic:
> is it the one for the thin clients or the one to access the internet?
> I could find no hint in the documentation.
>
> tia
> Antonello
>
> --
> edubuntu-users mailing list
> edubuntu-users at lists.ubuntu.com
> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/edubuntu-users
>