Welcome to the "edubuntu-devel" mailing list
achandra at linuxpresence.com
achandra at linuxpresence.com
Wed Feb 13 08:04:27 UTC 2008
Hello,
The current environment I am working in requires an Infrastructure
setup of Edubuntu 7.10. I have taken a look at both of these guides -
http://doc.ubuntu.com/edubuntu/edubuntu/handbook/C/multiple-server-setup.html
and
https://wiki.edubuntu.org/EdubuntuDHCPload-balancingFailover
to get me started. I specifically began with the second guide, and
wanted to test with a stand alone box. However, I ran into some
interesting problems.
1) The standalone box upon final installation did not recognize eth0
for dhcpd, and I had to edit the entry in /etc/default/dhcpd
2) I had to add completely re-install ltsp-standalone-server
3) Create/copy over a sample dhcp.conf into /etc/ltsp
This then got me to boot my first client. I am not sure this the
typical behavior one would/should expect on trying to install the
standalone?
Can someone first verify whether I went through the steps to install
the standalone properly?
6) In re-editing the dhcp.conf file in /etc/ltsp
I added
failover peer "dhcp" {
primary;
address 10.0.14.253;
port 519;
peer address 10.0.15.253;
peer port 520;
max-response-delay 30;
max-unacked-updates 10;
mclt 3600;
split 128;
load balance max seconds 3;
}
along with the other directives as shown in the above guide. However,
my client no longer booted, and I basically stopped there. (I didnt
bother to configure the second dhcp-server)
Can someone help/verify the whether the instructions in the wiki guide
work on edubuntu 7.10?
Thanks, Akash Chandrashekar
More information about the edubuntu-devel
mailing list