Accepted kolab-cyrus-imapd 2.2.12-7 (source)
Barry deFreese
bddebian at comcast.net
Thu May 18 01:54:23 BST 2006
Accepted:
kolab-cyrus-imapd 2.2.12-7 was ACCEPTED.
Component: universe Section: mail
Origin: Debian/unstable
Format: 1.7
Date: Thu, 18 May 2006 01:09:59 +0100
Source: kolab-cyrus-imapd
Binary: kolab-cyrus-admin, kolab-libcyrus-imap-perl, kolab-cyrus-pop3d, kolab-cyrus-clients, kolab-cyrus-common, kolab-cyrus-imapd
Architecture: source
Version: 2.2.12-7
Distribution: dapper
Urgency: low
Maintainer: Debian Kolab Maintainers <pkg-kolab-devel at lists.alioth.debian.org>
Changed-By: Barry deFreese <bddebian at comcast.net>
Description:
kolab-cyrus-imapd - Cyrus mail system (IMAP support)
Closes: 347242 358805 359696 364189
Changes:
kolab-cyrus-imapd (2.2.12-7) unstable; urgency=low
.
* debian/rules removed unneeded pts configure options
* corrected spelling typo (closes: Bug#364189)
.
kolab-cyrus-imapd (2.2.12-6) unstable; urgency=low
.
[ Steffen Joeris ]
.
* fix init-script to let kolab-cyrus-imapd start
(Closes: 358805) Thanks to Marvin Stark
* update po/POTFILES.in to make sure that debconf-updatepo
is working (Closes: #359696) Thanks to Thomas Huriaux
.
[ Noel Koethe ]
.
* add more information about popminpoll option in imapd.conf
* remove ptclient stuff because its not included upstream
.
kolab-cyrus-imapd (2.2.12-5) unstable; urgency=low
.
* upload to sid. closes: Bug#347242
* added ldap_version: 3 to imapd.conf
* disable popminpoll in imapd.conf because this makes no sense with
kolab because this will result in errors at the client
* add ptloader for ldap groups to imapd.conf and cyrus.conf
.
kolab-cyrus-imapd (2.2.12-4) experimental; urgency=low
.
* enabled --with-auth=pts and --with-pts=ldap
* install the new ptdump, ptexpire and ptloader binaries into
kolab-cyrus-imapd
* add fixing patches from Tobias Koenig <tobias.koenig at credativ.de>
151-cyrus_kolab_ldap.patch
152-cyrus_auth_pts.patch
* add LDAP configure options to imapd.conf
* enable pop in default cyrus.conf
.
kolab-cyrus-imapd (2.2.12-3) experimental; urgency=low
.
[ Noel Koethe ]
* add missing config files to the package
.
[ Steffen Joeris ]
* remove build-indeps and move them to build-depends
now the package will be build on the buildds
.
kolab-cyrus-imapd (2.2.12-2) experimental; urgency=low
.
* Build for kolab, based on packaging from cyrus22
special thanks to cyrus-maintainers
See ITP #180634 or Kolab on alioth
https://alioth.debian.org/projects/pkg-kolab/
.
[ Steffen Joeris ]
.
* conflicts against cyrus22 package
* drop pam, because we use saslauthd and direclty ldap
* new build-depends mainly for ldap
* include patches from Kolab usptream
( 100-kolab-imapd, 105-cyradm.sh, 110-Admin.pm, 120-kolab-Shell.pm,
130-kolab-imapd-goodchars, 140-kolab-ldap, 150-kolab-auth_unix)
* remove -doc package, because we can use the cyrus22-doc package
* remove -dev package because we don't need it
* drop nntp because there is no need for it with kolab
* remove various README files, because they only belong to the
cyrus22 package
* wrote README.Debian
* add lintian override for source
* change various pathes to make kolab- packages
* change pathes in scripts to make it kolab compatible
* update copyright
.
[ Noel Koethe ]
.
* change configurations
.
cyrus22-imapd (2.2.12-1) experimental; urgency=low
.
[ Benjamin Seidenberg ]
* Revised to build against pristine upstream sources.
[ Sven Mueller ]
* Fixed a discrepancy between documentation and actual behaviour of the
"dracinterval" imapd.conf option. Documentation always said the default
would be 0, while the default was actually 5.
[ Henrique de Moraes Holschuh ]
* Change build-dependency from libsnmp4.2-dev (ucd snmp) to libsnmp9-dev |
libsnmp5-dev (netsnmp), so that it works right in sid/etch and sarge
* Upload to experimental
.
cyrus22-imapd (2.2.12-0.9) unstable; urgency=low
.
[ Sven Mueller ]
* Add patch to be compatible with BerkeleyDB 4.3
* Add patch to fix TLS/SSL shutdown in timsieved
.
cyrus22-imapd (2.2.12-0.8) unstable; urgency=low
.
[ Sven Mueller ]
* Fix a problem in the init scripts new status check, found by Benjamin
Seidenberg.
.
cyrus22-imapd (2.2.12-0.7) unstable; urgency=low
.
[ Sven Mueller ]
* Switch most deletions of autogenerated files to use debian/deletable.files
* Switch all remaining patches to dpatch so that the .diff.gz should now be
clean except for the files in debian/.
.
cyrus22-imapd (2.2.12-0.6) unstable; urgency=low
.
[ Sven Mueller ]
* Added kolab2 annotation patch as proposed by Christoper Sacca
* Added a small patch to lower the minimum pop3 timeout to 1 minute.
The default is still at 10 minutes. I also added some documentation to make
it clear to admins that it is _not_ recommended to lower the value to less
than 10 minutes (because that is what the standard says it should be at).
I needed this change for use at my workplace though. The patch is disabled
by default.
* Patched init script to support everything LSB 3.0 asks for, including the
"right" return codes, as far as we can.
* Add patch to enhance sieveshell a bit:
- Add --execfile parameter to read commands from a file
- Add --password parameter to pass the users parameter on the commandline
- Add code to return with a non-zero exit code if the last command
executed failed for some reason.
.
[ Ondrej Sury ]
* Add 64bit quota dpatch.
* Rerun autoconf and add result as dpatch.
.
cyrus22-imapd (2.2.12-0.5) unstable; urgency=low
.
* Update upgrading information
* Include masssievec in cyrus22-common
* Applied patch from Raphael 'SurcouF' Bordet <surcouf at debianfr.net> to add
nntp support again.
* Eliminate an unused variable from tools/masssievec to get rid of perl
warning.
* Update Recommends and Suggests for cyrus22-common as suggested by HMH
* Move several patches from patching the source directly to patching through
the use of dpatch
.
cyrus22-imapd (2.2.12-0.4) unstable; urgency=low
.
* Fix usage message in deliver.c to reflect Debian naming of (cyr)deliver,
(cyr)quota and (cyr)reconstruct
* Document the defaultdomain setting a bit better (hopefully)
* fix deletion of debian/cyrus-hardwired-config.txt during cleanup
* build both arch-dependend and arch-independend parts when debian/rules is
called for the build target
* Add Sven Mueller to the list of uploaders
.
cyrus22-imapd (2.2.12-0.3) unstable; urgency=low
.
* Add a README which contains the configure options used to
compile the package. The README is auto-generated by debian/rules
* cyrus22-clients needs to conflict with cyrus21-clients
* cyrus22-common needs to conflict with cyrus21-common
* Add a guess of what the problem might be to the set_cert_stuff failure
message
* Update a few Replaces:, Provides: and Conflicts: lines in debian/control
.
cyrus22-imapd (2.2.12-0.2) unstable; urgency=low
.
* Fix some more perl executable paths
* clean up debian directory a bit
* install sievec with cyrus22-common
* install mbexamine with cyrus22-common
* install smmapd with cyrus22-common
* install cyr_expire with cyrus22-common
* install installsieve with cyrus22-admin
.
cyrus22-imapd (2.2.12-0.1) unstable; urgency=low
.
* Initial revision of cyrus22-imapd package
- debian packaging taken from cyrus21-imapd_2.1.18-1
* Add/fix imapd.conf info regarding virtual domains
* Add DRAC support (i.e. apply DRAC patch from /contrib)
* Add syncldap2cyrus.pl script from #260833 (a cyrus21 bug)
Files:
6d319c9a5811ae8e3b1f83b58ba5a651 1130 mail extra kolab-cyrus-imapd_2.2.12-7.dsc
9786823d2d025dbb8af4e2c6347ac43e 142261 mail extra kolab-cyrus-imapd_2.2.12-7.diff.gz
96b2a6f932cf9f4f7ac5c638503af9a6 1983818 mail extra kolab-cyrus-imapd_2.2.12.orig.tar.gz
More information about the dapper-changes
mailing list