Accepted gutenprint 4.3.99+cvs20051122.dfsg.1-2 (source)
Daniel Holbach
dh at mailempfang.de
Tue Jan 10 15:26:27 GMT 2006
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Origin: Debian/unstable
Format: 1.7
Date: Tue, 10 Jan 2006 15:24:38 +0000
Source: gutenprint
Binary: foomatic-db-gutenprint, libgutenprintui1-dev, libgutenprint-dev, ijsgutenprint, libgutenprintui2-1, libgutenprintui1-1, libgutenprint2, escputil, cupsys-driver-gutenprint, gimp-print, gutenprint-locales, foomatic-db-gimp-print, cupsys-driver-gimpprint, ijsgimpprint, libgutenprintui2-dev, libgutenprint-doc
Architecture: source
Version: 4.3.99+cvs20051122.dfsg.1-2
Distribution: dapper
Urgency: high
Maintainer: Debian Printing Group <debian-printing at lists.debian.org>
Changed-By: Daniel Holbach <dh at mailempfang.de>
Closes: 96401 110066 113075 121597 123796 123811 128421 139000 139218 145094 147404 148737 156228 166815 170473 172116 175970 179120 179137 179170 179171 179203 189093 193501 203930 212302 217295 221662 223081 233338 233971 237561 260072 262852 263763 274820 293178 293384 293890 300966 302434 307286 318911 319109 319416 320745 321599 321603 322066 322397 323450 335789 337845 338961 340155
Changes:
gutenprint (4.3.99+cvs20051122.dfsg.1-2) unstable; urgency=low
.
* debian/control.in: Remove xlibs-dev from Build-Depends, in
anticipation of its removal from unstable.
.
gutenprint (4.3.99+cvs20051122.dfsg.1-1) unstable; urgency=low
.
* New upstream CVS snapshot (Closes: #340155).
* The GFDL licensed user's guide has been removed from the
upstream tarball to create a DFSG-free .orig.tar.gz.
* Several Epson Stylus Photo printers have been retuned since the
last version (Closes: #335789).
* The Epson Stylus C88 is now supported (Closes: #338961).
* debian/control.in:
- Improve the ijsgutenprint package description (Closes: #337845).
- Remove 'Suggests: gutenprint-doc (>= ${Source-Version})' from
gimp-print and cupsys-driver-gutenprint.
- Remove the gutenprint-doc package, which was GFDL licensed.
The control data is kept in debian/control.gfdl.
* debian/rules: Update UPSTREAM_VERSION to 5.0.0-rc2.
* debian/copyright: Remove the GFDL manual paragraph, and document
its removal due to DFSG incompatibility.
.
gutenprint (4.3.99+cvs20050901-1) unstable; urgency=low
.
* New upstream release candidate.
* Drop patches which have been incorporated upstream:
- 01_cups_genppdupdate_filename_metacharacters.dpatch
- 02_escp2_r800_papers.dpatch
- 03_escp2_colour_adjust_segfault.dpatch
- 04_print_settings_corruption.dpatch
* debian/control:
- cupsys-driver-gutenprint: Drop libperlmenu-perl dependency.
- gimp-print: Add an "Enhances: gimp" to reinforce the fact this is a
useful part of gimp (Closes: #322066). This does not entirely fix the
upgrade issues, but without a strict dependency in gimp (which the
author does not want), this is the best that can be done.
* src/cups/cups-genppdconfig.in: Remove support for perlmenu in favour
of dialog(1). This prevents a number of warnings on startup, and also
removes a lot of dead code (Closes: #323450). Applied as
05_genppdconfig_remove_perlmenu.dpatch.
.
gutenprint (4.3.99+cvs20050813-2) unstable; urgency=low
.
* src/main/print-canon.c: Change "Plain PIXMA" paper name to
"PlainPIXMA" in order to avoid illegal whitespace in
generated PPD files (Closes: #322397).
.
gutenprint (4.3.99+cvs20050813-1) unstable; urgency=low
.
* New upstream release candidate.
* src/cups/cups-genppdconfig.in: drop Locale::gettext patch,
which is now incorporated upstream.
* debian/control.in, debian/rules: Use dpatch.
* Added cups-genppdupdate patch as
01_cups_genppdupdate_filename_metacharacters.dpatch
* Don't segfault when using certain paper types with an Epson R800.
Applied patch from Dan Torop as 02_escp2_r800_papers.dpatch
and 03_escp2_colour_adjust_segfault.dpatch (Closes: #321603).
* Don't corrupt print settings under certain conditions, due to
using uninitialised global variables. Applied patch from upstream
based on a patch contributed by Dan Torop as
04_print_settings_corruption.dpatch (Closes: #321599).
* debian/debian/cupsys-driver-gutenprint.postinst: Remove bashisms.
.
gutenprint (4.3.99+cvs20050801-1) unstable; urgency=low
.
* New upstream release candidate.
* src/cups/cups-genppdconfig.in: Remove "use Locale::gettext" to
drop missing dependency on liblocale-gettext-perl
(Closes: #320745).
.
gutenprint (4.3.99+cvs20050715-4) unstable; urgency=low
.
* debian/rules: Correct the names of the ijsgutenprint
symlinks.
.
gutenprint (4.3.99+cvs20050715-3) unstable; urgency=low
.
* src/cups/cups-genppdupdate.in: Apply patch to handle shell
metacharacters in PPD filenames, to fix a regression from
cupsys-driver-gimpprint (Closes: #319109).
* debian/control.in: Add foomatic-db-gimp-print as a
transitional package to ease upgrades.
* debian/rules: ijsgutenprint symlinks should not be relative
to the build directory (Closes: #319416).
.
gutenprint (4.3.99+cvs20050715-2) unstable; urgency=low
.
* debian/control.in:
- ijsgimpprint depends on ijsgutenprint, not
cupsys-driver-gutenprint (Closes: #318911).
- ijsgimpprint is in section text, not graphics
(correction of override disparity).
.
gutenprint (4.3.99+cvs20050715-1) unstable; urgency=low
.
* New upstream release candidate.
* debian/control.in: Change Maintainer to Debian Printing Group
<debian-printing at lists.debian.org>.
* debian/rules: Don't build translated PPDs. They may be generated
after installation by the user.
.
gutenprint (4.3.99+cvs20050702-1) experimental; urgency=low
.
* New upstream release candidate (Closes: #293890).
* Renamed package to gutenprint. The following packages were
renamed in consequence:
- cupsys-driver-gimpprint renamed to cupsys-driver-gutenprint
- foomatic-db-gimp-print renamed to foomatic-db-gutenprint
- gimpprint-doc renamed to gutenprint-doc
- gimpprint-locales renamed to gutenprint-locales
- ijsgimpprint renamed to ijsgutenprint
- libgimpprint renamed to libgutenprint
- libgimpprint-dev renamed to libgutenprint-dev
- libgimpprint-doc renamed to libgutenprint-doc
* New packages:
- libgimpprintui1-1 (GTK+ 1.2 UI library)
- libgimpprintui1-dev (GTK+ 1.2 UI library headers)
- libgimpprintui2-1 (GTK+ 2.0 UI library)
- libgimpprintui2-dev (GTK+ 2.0 UI library headers)
* Upgrade to Standards-Version 3.6.2
* Build-Depends:
- replace libreadline4-dev with libreadline5-dev
- add libcupsimage2-dev
- remove libtool
* debian/rules: add LIBRARYUI_VERSION, required to support
separate sonames for libgutenprint and libgutenprintui*.
* cupsys-driver-gutenprint:
- add cups-genppdupdate
- generates the PPDs in postinst, and removes them in prerm
- use new versioned CUPS executables
* libgutenprint: add modules and XML data.
* libgutenprint-doc:
- fix documentation installation for new API reference and
developer's reference.
- distribute gutenprint.pdf; gutenprint.ps is no longer created.
* Remove old and outdated manual pages.
* Provide versioned ijsgutenprint manual page, and unversioned
symlinks for the binary and manpage.
* Create a dummy cupsys-driver-gimpprint package to enable
upgrades from stable.
* Create a dummy ijsgimpprint package to enable upgrades from stable.
* Remove symlinks in debian directory.
* Don't autogenerate files in debian directory for anything but the
libgutenprintui package.
.
gimp-print (4.2.7-10) unstable; urgency=high
.
* cupsys-driver-gimpprint: Depend on a perl >= 5.8.0, otherwise
upgrades from woody may fail due to /usr/bin/cups-genppdupdate
using features only available in perl 5.8 (Closes: #307286).
* Build-Depend on libreadline5-dev, rather than the old
libreadline4-dev.
.
gimp-print (4.2.7-9) unstable; urgency=low
.
* debian/cups-genppdupdate: Fix grepping of PPDs to work with PPD
file names with shell metacharacters in them. Patch from Martin
Pitt (Closes: #302434).
.
gimp-print (4.2.7-8) unstable; urgency=low
.
* cupsys-driver-gimpprint: Depend on cupsys >= 1.1.23 to ensure
that /etc/init.d/cupsys supports the force-reload option.
Some older versions of cupsys did not, and this causes
package configuration to fail when restarting cupsys.
(Closes: #300966)
.
gimp-print (4.2.7-7) unstable; urgency=low
.
* debian/control.in:
- Prefer gs-esp as gs interpreter. Patch from Colin Watson.
- Recommend gnome-gv as default postscript-viewer. Patch
from Sebastien Bacher.
.
gimp-print (4.2.7-6) unstable; urgency=low
.
* Allow A4 printing on HP DesignJet printers. Patch from
Klaus Singvogel.
.
gimp-print (4.2.7-5) unstable; urgency=low
.
* Patch src/cups/Makefile.in so that genppd will use the "C"
locale when generating PPDs, not the locale of the build
system. This will prevent wrongly UTF-8 encoded "ISOLatin1"
PPDs being generated (Closes: #293178).
* ijsgimpprint: Conditionally depend upon gs-afpl instead of
gs-aladdin, which it replaces (Closes: #293384).
.
gimp-print (4.2.7-4) unstable; urgency=low
.
* cupsys-driver-gimpprint: Use "force-reload" rather than
"reload" in postinst and postrm (Closes: #274820). Reported
by Martin Pitt.
* Applied GNU/k*BSD patch from Robert Millan (Closes: #263763).
.
gimp-print (4.2.7-3) unstable; urgency=low
.
* foomatic-db-gimp-print: ensure all files are UTF-8 encoded
by building the package in a UTF-8 locale (en_GB.UTF-8).
Thanks to Chris Lawrence for finding this problem.
.
gimp-print (4.2.7-2) unstable; urgency=medium
.
* Medium urgency to facilitate the libtiff transition.
* cupsys-driver-gimpprint:
- Link explicitly with -lcupsimage, rather than
`cups-config --image --libs`. This prevents unnecessary
libpng, libjpeg and libtiff dependencies. The cups-config
logic in configure is overridden. Thanks to Steve Langasek
for this patch (Closes: #262852).
- Backport some PPD generation logic from current Gimp-Print
CVS, and use the new PPD keywords in cups-genppdupdate.
The PPD PCFileName keyword was made compliant with the PPD
standard with version 4.2.6 (read: crippled to an 8.3 DOS
filename) which broke the upgrade script since the full PPD
name could no longer be encoded. The new Gimp-Print specific
keywords *StpDriverName, *StpPPDLocation and *StpLocale have
been added to the PPDs, and this information is now used to
correctly upgrade PPDs (Closes: #260072).
* debian/rules: Don't enable maintainer-mode when running
configure.
.
gimp-print (4.2.7-1) unstable; urgency=low
.
* New upstream stable release.
* Dropped patches for:
- missing strdup prototype in AM_PATH_GIMPPRINT (#233971).
- fixing garbage output when files generated with psnup are
printed (#175970).
- correct margin definitions for Epson Stylus C63, C64, C83
and C84.
All of these patches have been incorporated into the new
release.
* Update to Standards-Version 3.6.1.
* cupsys-driver-gimpprint: update Recommends to depend upon the
current gs package names, and put the virtual package
postscript-viewer as the last alternative, rather than the
first.
* cupsys-driver-gimpprint: patched src/cups/Makefile.am to
disable linking rastertoprinter with a static libgimpprint.
.
gimp-print (4.2.6-7) unstable; urgency=high
.
* Reupload with high urgency to shorten libcupsys2-gnutls10
transition waiting time.
.
gimp-print (4.2.6-6) unstable; urgency=low
.
* cupsys-driver-gimpprint-data depends on cupsys-driver-gimpprint.
.
gimp-print (4.2.6-5) unstable; urgency=medium
.
* NMU.
* Rebuild against libcupsys2-gnutls10.
.
gimp-print (4.2.6-4) unstable; urgency=low
.
* Split architecture-independent data in cupsys-driver-gimpprint
into a separate arch-all cupsys-driver-gimpprint-data package
which cupsys-driver-gimpprint depends upon (Closes: #233338).
* Add missing strdup prototype in AM_PATH_GIMPPRINT in
gimpprint.m4. This prevents configure scripts using this macro
from segfaulting on ia64 (Closes: #233971).
* Correct margin definitions for Epson Stylus C63, C64, C83 and
C84. This is a temporary fix until the margins have been
correctly computed.
* Build-Depend upon libijs-dev (>= 0.35-1) to ensure that
ijsgimpprint is built against the current libijs
(Closes: #237561).
.
gimp-print (4.2.6-3) unstable; urgency=low
.
* Rebuild against new Foomatic packages. This should hopefully
fix autobuilding problems with older Foomatic releases (which
wouldn't autoconfigure on the buildd).
.
gimp-print (4.2.6-2) unstable; urgency=low
.
* Fix garbage output when files generated with psnup are printed.
The output quality will be degraded, and warnings will be
logged, since the job options have been broken. This is
because psnup generates non-ADSC compliant PostScript which
makes pstops output incorrect job options. Patch from
Martin Kögler (Closes: #175970).
.
gimp-print (4.2.6-1) unstable; urgency=low
.
* New upstream stable release.
* cupsys-driver-gimpprint: cups-genppdupdate should escape
metacharacters in queue names. quotemeta fix from David
Beaumont (Closes: #223081).
* A locale issue which resulted in buggy PostScript output
with some locales has been fixed (Closes: #221662).
* CUPS PPD files moved from /usr/share/cups/model/gimp-print
to /usr/share/cups/model/gimp-print/4.2. This is the
5.0 naming scheme, and will allow 4.2 and 5.0 to
coexist. cups-genppdupdate uses the new scheme.
.
gimp-print (4.2.5-6) unstable; urgency=low
.
* Change Recommends on gimpprint-locales to Suggests (Closes: #212302).
* cupsys-driver-gimpprint postrm should not reload cupsys if it
has already been removed (Closes: #217295).
.
gimp-print (4.2.5-5) unstable; urgency=low
.
* Clean up package descriptions in debian/control.in.
* Don't depend on essential package gzip.
.
gimp-print (4.2.5-4) unstable; urgency=low
.
* Fix the use of an unintialised value in cups-genppdupdate
(Closes: #193501).
* cups-genppdupdate no longer prints an error when there are no PPD files
available (use Perl glob() instead of shell globbing).
* Update cups-genppdupdate using the latest upstream CVS version.
* Replace cupsys-driver-gimpprint dependency on libcompress-zlib-perl, with
a gzip dependency (gunzip replaces Compress::Zlib in cups-genppdupdate).
* Update for Foomatic 3.0:
- Update foomatic-db-gimp-print description (sync with foomatic-db).
- Build-Depend on foomatic-db-engine (foomatic-bin is deprecated).
- Update foomatic-db-gimp-print dependencies (correctly depend on the
new foomatic packages and conflict with the old packages).
- Run configure with --with-foomatic3
* Include escputil fix from 4.2.6 prerelease to fix intermittent hanging
reads from printer (Closes: #156228).
* Audit all manual pages to ensure correct use of hyphens and minus signs,
required for copy and paste in a unicode locale (Closes: #203930).
* gimp1.2-print has been removed now the gimp package provides an up-to-date
version of the Print plugin.
* Updated debian/copyright to include the GFDL-licensed User's Guide.
.
gimp-print (4.2.5-3) unstable; urgency=low
.
* Build-Depend on libcupsimage2-dev (Closes: #189093).
* Remove automake, autoconf, libtool, and bison from
Build-Depends, since they are not strictly required.
* Remove docbook-utils, texi2html and imagemagick from Build-Depends,
since the documentation is pre-generated in the upstream tarball.
* Change my maintainer email address to <rleigh at debian.org>.
* Move libgimpprint1-dev to section libdevel.
.
gimp-print (4.2.5-2) unstable; urgency=low
.
* cupsys-driver-gimpprint: cups-genppdupdate will not die if grep exits with
a nonzero status (for example, there are no Gimp-Print PPDs in use).
(Closes: #179137)
* cupsys-driver-gimpprint: Depend on libcompress-zlib-perl, since dh_perl
doesn't compute module dependencies.
(Closes: #179120, #179170, #179171, #179203)
.
gimp-print (4.2.5-1) unstable; urgency=low
.
* New stable release
* Update for Standards-Version 3.5.7
* Use debian/build and debian/install instead of debian/gimp-print-build
and debian/gimp-print-install, respectively.
* Use dh_install rather than dh_movefiles. This makes debian/rules
slightly cleaner, and debian/install is unchanged after install.
* Create symlinks for HTML manuals, since different versions
of texi2html and db2html create different names.
* Make the dependencies sane (remove incorrect dependencies, and correct
dubious ones). foomatic-db-gimp-print now depends only upon foomatic-db
and ijsgimpprint.
* escputil has been changed to section "utils", and the override changed
(Closes: #145094).
* Gimp-Print PPDs are automatically upgraded using a new tool,
cups-genppdupdate, which will prevent the in-use PPDs mismatching with
the libgimpprint version in use (Closes: #172116).
* The Epson stc640 will now print in greyscale and black and white at
resolutions >= 720 DPI (Closes: #170473).
* The CUPS epson backend uses non-blocking I/O, and so will not hang with
some models when no status readback data is sent.
.
gimp-print (4.2.4-1) unstable; urgency=low
.
* New stable release.
* foomatic-db-gimp-print: removed "stp" data, to start the transition
to using ijsgimpprint only.
* The escputil manual page documents the needed kernel configuration
options (Closes: #139000).
* The gimpprint-doc package includes the following manual pages:
gimpprint-color.7, gimpprint-dithers.7, gimpprint-imagetypes.7
gimpprint-inktypes.7, gimpprint-mediasizes.7
gimpprint-mediasources.7, gimpprint-mediatypes.7
gimpprint-models.7, gimpprint-resolutions.7
This documents all the features of gimp-print, in particular all of the
details from src/ghost/README (Closes: #113075).
* Magenta and cyan are no longer swapped on some Lexmark printers
(Closes: #166815).
.
gimp-print (4.2.3-2) unstable; urgency=low
.
* Use libtool 1.4.3 instead of the release version, to correctly support
shared libraries on some architectures. Closes #168901
* escputil is now in section "utils". Closes #145094
.
gimp-print (4.2.3-1) unstable; urgency=low
.
* New stable release.
* Fixed doc-base problems in libgimpprint-doc. The doc-base file is
generated with sed to insert the version number, Closes #149847
* libgimpprint$(VERSION)-doc provides and conflicts with a virtual
package libgimpprint-doc to prevent clashes with gimpprint.info
docs.
* New package ijsgimpprint. This provides an IJS server for use
with ghostscript.
* Remove the autotools, texi2html, imagemagick and docbook-utils from the
Build-Depends.
* Put config.sub and config.guess into scripts/ and clean
libgimpprint-doc.doc-base
* I am the new maintainer of gimp-print for Debian.
.
gimp-print (4.2.2-pre2-1) unstable; urgency=low
.
* New stable release, Closes: #148737
* Upgrade to debhelper version 4 (RL)
* Automate library versioning to work for stable and unstable series.
LIBRARY_VERSION is the library major version or -UPSTREAM_VERSION (RL)
* Update configure regeneration to work with configure.ac (RL)
* libgimpprint$(VERSION)-dev provides and conflicts with a virtual
package `libgimpprint-dev' (RL)
* Remove libgimpprint.postinst as ldconfig is called by debhelper (RL)
* Update package descriptions (RL)
.
gimp-print (4.2.2-pre1-1) unstable; urgency=low
.
* New upstream release, Closes: #147404, #139218
* Move escputil to section utils (RL)
* Add postscript-viewer virtual package as an alternative to gs Recommends
for cupsys-driver-gimpprint (RL)
* Reinitialise cupsys after installation or removal of
cupsys-driver-gimpprint (RL)
* Correctly version libgimpprint1 shlibs with -V dh_makeshlibs option
* Fix libgimpprint.postinst to use 'if' instead of 'case', removing a
lintian warning. (RL)
* Split out the message catalogues from the libgimpprint package into
a new gimpprint-locales package to avoid filename conflicts when
multiple libgimpprint versions are installed concurrently. (RL)
* Add libgimpprint-doc.doc-base (existed for six months, but was never
added to CVS!) (RL)
* New package foomatic-db-gimpprint. Contains foomatic data (RL)
.
gimp-print (4.2.0-4) unstable; urgency=low
.
* Apply Roger's user's guide Makefile.am patch, Closes: #128421
* Work around bug #130756 by building docs with EPS1 figures.
.
gimp-print (4.2.0-3) unstable; urgency=low
.
* Fix locales package description, Closes: #123796
* Change conflicts to replaces, Closes: #123811
.
gimp-print (4.2.0-2) unstable; urgency=low
.
* Fix build dependencies, Closes: #121597
* Fix broken gimpprint-doc.doc-base pointing to old index filename
* Fix libgimpprint.postinst to use 'if' instead of 'case', removing a
lintian warning. (Roger Leigh)
* Split out the message catalogues from the libgimpprint package into
a new gimpprint-locales package to avoid filename conflicts when
multiple libgimpprint versions are installed concurrently. (RL)
* Add libgimpprint-doc.doc-base (existed for six months, but was never
added to CVS!) (RL)
.
gimp-print (4.2.0-1) unstable; urgency=low
.
* New upstream release
* cupsys-driver-gimpprint only includes the basic `C' POSIX locale
ppd files due to the size of the ppd files (Roger Leigh)
* New package gimpprint-doc contains the new user guide. (RL)
* Enable i18n (RL)
* Add Build-Depends for gettext (>= 0.10.36-1), because
'make install' fails with earlier versions due to absent
DESTDIR support. (RL)
* libgimpprint-doc uses ps instead of dvi manual, due to inclusion
of graphics (RL)
* gimp1.2-print no longer registers documentation with doc-base, as
the manual is provided in libgimpprint-doc (RL)
* Disable building of translated PPD files (RL)
.
gimp-print (4.1.99-b1-1) unstable; urgency=low
.
* New upstream release, Closes: #110066
* Remove README.dither from libgimpprint-dev.docs (Roger Leigh)
* Add image samples to gimp1.2-print and cupsys-driver-gimpprint (RL)
* Change rules and control to use ABI library versioning (RL)
* Changed library version names to reflect upstream library
versioning change to ABI versioning. (RL)
.
gimp-print (4.1.99-a2-1) unstable; urgency=low
.
* New upstream release
.
gimp-print (4.1.99-a1-1) unstable; urgency=low
.
* New upstream release (first 4.2 pre-release)
.
gimp-print (4.1.10-1) unstable; urgency=low
.
* New upstream release (4.1.8 and 4.1.9 were buggy)
.
gimp-print (4.1.7-1) unstable; urgency=low
.
* New package libgimpprint-doc for Info and dvi docs. (Roger Leigh)
* Change debian/rules to use separate binary-arch and binary-indep
targets (Roger Leigh)
* New upstream release
.
gimp-print (4.1.6-2) unstable; urgency=low
.
* Fix build dependencies to include flex, Closes: #96401
.
gimp-print (4.1.6-1) unstable; urgency=low
.
* New upstream release
.
gimp-print (4.1.5-2.01) unstable; urgency=low
.
* Recompile 4.1.5-2 with updated debhelper to fix dependencies
* Closes #90741
.
gimp-print (4.1.5-2) unstable; urgency=low
.
* Clean up build process so that things work even if some scripts
don't have execute permissions, complicate things a bit by using
funky building script, Closes #89283, I hope...
.
gimp-print (4.1.5-1) unstable; urgency=low
.
* New upstream release
* First Official version uploaded to Debian
* Close ITP bug for wnpp, Closes #85563
.
gimp-print (4.1.4-2) unstable; urgency=low
.
* Repackage gimp-print after forking the Debian branch from 4.1.4
* Add version numbers to the libgimpprint package name
* Move documentation files from libgimpprint to libgimpprint-dev
.
gimp-print (4.1.4-1) unstable; urgency=low
.
* New upstream release
* Debian package rewritten from scratch.
* Added diversion of the print plugin that is part of the GIMP
package to /usr/lib/gimp/1.2/print
* Fixed shared library dependencies for programs linked with
libgimpprint
* Added /etc/cups/command.types as a conffile for package cupsys-
driver-gimpprint
* Added gimp1.2-print html and sgml docs to doc-base
* Remove /etc/cups in postrm for cupsys-driver-gimprint (but
won't if not empty)
* Added versioned debhelper Build-Depends
.
gimp-print (4.0.2-1) unstable; urgency=low
.
* Debian packages of the latest GP
.
gimp-print (3.1.4-1) unstable; urgency=low
.
* Debianised gimp-print built from gimp-print CVS at sourceforge.
Files:
2dd85a1181ee421c89f951c7b315dcdc 1404 graphics optional gutenprint_4.3.99+cvs20051122.dfsg.1-2.diff.gz
a8d6d35bfc90c7e6a8bf87b8c1524a71 1203 graphics optional gutenprint_4.3.99+cvs20051122.dfsg.1-2.dsc
1784328467949d164cc2ce7a246cb727 4240238 graphics optional gutenprint_4.3.99+cvs20051122.dfsg.1.orig.tar.gz
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
iQEVAwUBQ8PRtgF4adwMEr3XAQI0iwf9HoH+s65wYbem/NoDQFjPPG0WJrDeOLoA
9idh4mVEzNy10pzM3oZIfxPMY3RKDmPvInuefIt3HXlVbRZJc19+dQHX+GxSp79X
ABf0ixFfQoXheouUK2kgXVUaQdgTa3lOq2DNB3hBW/yzCYTDC6UCz4+urcpXhh24
JXkdCfwzAPAUhOv1ZpEOyLZG+fZMeRI5eOm9rqfotkQgXGyAnB3aVBqc3KkQYvGF
0NjDop3R+4iT13c/YZ3/dCkdaND9Nk31GkpNi/dCy3Mh5thGch7l2UxRMUIq+Sn3
n4AxGnK3GLYCwlv6veAgVgMMOWJFwZVhEh6Gwv2bSF9RfsNqbqARKg==
=442d
-----END PGP SIGNATURE-----
Accepted:
gutenprint_4.3.99+cvs20051122.dfsg.1-2.diff.gz
to pool/main/g/gutenprint/gutenprint_4.3.99+cvs20051122.dfsg.1-2.diff.gz
gutenprint_4.3.99+cvs20051122.dfsg.1-2.dsc
to pool/main/g/gutenprint/gutenprint_4.3.99+cvs20051122.dfsg.1-2.dsc
gutenprint_4.3.99+cvs20051122.dfsg.1.orig.tar.gz
to pool/main/g/gutenprint/gutenprint_4.3.99+cvs20051122.dfsg.1.orig.tar.gz
More information about the dapper-changes
mailing list