Accepted openldap2.2 2.2.23-1 (source)
Ubuntu Archive Auto-Sync
katie at jackass.ubuntu.com
Thu Apr 14 18:48:18 CDT 2005
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Origin: Debian/unstable
Format: 1.7
Date: Thu, 14 Apr 2005 23:48:49 +0100
Source: openldap2.2
Binary: slapd, ldap-utils, libldap-2.2-7
Architecture: source
Version: 2.2.23-1
Distribution: breezy
Urgency: high
Maintainer: Torsten Landschoff <torsten at debian.org>
Changed-By: Ubuntu Archive Auto-Sync <katie at jackass.ubuntu.com>
Closes: 70923 71127 71131 71366 71469 71470 71471 71472 71473 71584 71602 71716 71852 71854 76719 77633 77635 78003 78950 80457 80591 81359 82491 84954 87986 88079 90165 90323 90855 91318 92331 92916 93605 94963 94967 95600 96145 96957 98039 98683 98805 98853 99440 99547 99998 100584 100938 101602 101602 105905 110479 111765 111833 112459 114021 124859 130277 131469 131469 131502 131617 132566 134564 134774 134945 135223 136240 137100 137552 137552 137552 137718 138136 138558 140387 141712 141959 146968 148033 151222 151511 152959 155197 155937 157037 159078 159542 160412 160763 160964 160965 162123 162284 164791 166777 167566 169950 171008 171894 175704 175736 176462 176832 176980 178014 181168 185173 185676 189777 189811 189933 189947 190085 190155 190156 190164 190401 190660 190724 190797 190799 192163 192423 192431 193854 193854 194192 194192 194740 194943 195029 195990 196995 197014 198553 201482 201991 202306 202592 202741 203292 204008 205609 209019 210731 214054 214270 215373 216661 216797 224058 225807 226583 228705 228705 228886 229195 233512 233833 234593 234639 235749 243537 244827 245347 249152 251036 253633 254183 254184 254186 257513 261696 264448 297123 297123 298741 300212
Changes:
openldap2.2 (2.2.23-1) unstable; urgency=low
.
* debian/slapd.scripts-common: Move all shell functions of the maintainer
scripts here to have it all in one place.
* Another pass over the maintainer scripts to remove cruft and tidy up
the code a bit. Fixed some bugs on the way.
* Test upgrade and installation revealed some bugs, mostly typos:
+ return in shell actually is "return $?", not "return 0" as I though
+ Referenced $src where $srcdir was meant.
+ Only load old directories on upgrade and not during initial
installation.
.
openldap2.2 (2.2.23-0.pre6) experimental; urgency=low
.
Torsten Landschoff <torsten at debian.org>:
* debian/slapd.postinst: Add a testing interface to test the helper
functions.
* debian/slapd.postinst: Make sure that debconf actually displays the
error message even if the user has already seen it before.
* debian/slapd.postinst (compute_backup_path): Make function more robust
in case we don't know the old version or the suffix of the database.
Converted the backup dir to a more simple scheme which should be save
against accidental overwriting.
* Rewrote part of the maintainer scripts for correct handling of
directory dumps in preinst. New debconf questions etc.
* Move the manpage of slappasswd to ldap-utils where slappasswd itself
is included (closes: #300212).
+ debian/control: Add Replaces: slapd << 2.2.23-0.pre6 to ldap-utils.
+ debian/move_files: Move slappasswd manpage into ldap-utils.
* debian/slapd.config: Don't fail if hostname is unset (pulled from
Ubuntu, thanks to Jeff Bailey).
* Applied patch by Quanah Gibson-Mount (directory administrator of Stanford)
to add -q option to some tools for quick operation without updating
logs. This is mostly for importing directories from LDIF backups.
* Go back to libdb4.2 as OpenLDAP is known to have problems with BDB 4.3.
+ debian/control: Update dependencies for BDB 4.2.
+ debian/slapd.scripts-common: Mark all databases before this version
as incompatible.
* Fix some bashisms in maintainer scripts.
* debian/slapd.postinst: Include the version of the backup in the
backup of a database directory.
Carlo Contavalli <ccontavalli at debian.org>:
* debian/slapd.init: Print command line if starting a daemon failed.
* debian/slapd.postinst: Handle hdb backend just as if it was bdb.
* debian/README.Debian: Add some notes about DB_CONFIG and how to run
slapd under a different uid/gid.
* Install an example DB_CONFIG file during initial configuration
+ slapd.postinst: Add a function to implement this and hook it into
create_new_configuration.
+ debian/DB_CONFIG: Example DB_CONFIG that is installed.
+ debian/slapd.examples: Mark DB_CONFIG as an example.
* servers/slapd/daemon.c: Actually change the permissions of the
unix socket if requested using an ldapi url with x-mod.
* debian/slapd.scripts-common: change privileges of upgraded databases
as indicated by SLAPD_USER and SLAPD_GROUP variables.
* debian/slapd.scripts-common,slapd.postinst: corrected some minor
typos.
.
openldap2.2 (2.2.23-0.pre5) experimental; urgency=low
.
* Apply NTLM patch from ximian-connector source package.
* debian/slapd.postinst: Fix small typo leading to upgrade failures.
Added some notes while wading through maintainer scripts.
* debian/slapd.postinst: Make slapadd more noisy, writing the new
directory to stderr if something goes wrong (should help for
bug #236097).
* Make slapd.init idempotent by adding --oknodo to start-stop-daemon
invocations (closes: #298741). Kudos to Bill Allombert for this
patch.
* slapd.postinst: Try to fix slapd.conf for syntactic and semantic changes
introduced upstream into 2.2.x.
* slapd.scripts-common: Make sure directories before 2.2.23 are dumped
and reloaded on upgrade.
.
openldap2.2 (2.2.23-0.pre4) experimental; urgency=low
.
* Rename libldap2.2 to libldap-2.2-7 to match soname. Updated
debian/{control,rules,...}.
* Checked the usage of the ucdata files shipped with libldap2 before.
Actually they stem from liblunicode which is only linked to slapd.
Therefore those files are shipped with slapd now. This change is
relevant so that multiple libldap-2.2-x packages can coexist later.
* debian/control: Updated for slapd replacing files from libldap2.
* debian/control: Recommend db4.3-util instead of db4.2-util as we are
using the former version now for slapd.
* debian/control: Add Build-Depends for libperl-dev, this time for
real. I wonder what went wrong last time as it built correctly with
pdebuild (closes: #297123).
.
openldap2.2 (2.2.23-0.pre3) experimental; urgency=low
.
* debian/slapd.prerm: Reformat and fix double stopping of slapd. Find
out which bug we are working around and document it.
* debian/configure.options: Enable ACI support (closes: #101602).
Looked through the source code and it seems to be properly
insulated to not make a difference when not used.
* .../Makefile.in: Remove -s option from install invocations and let
dh_strip handle stripping binaries (closes: #264448).
* debian/slapd.postinst: Code cleanup and reading, unused and duplicate
code removed. Main body still needs fixing.
* debian/slapd.postinst: Fixed chmod --reference calls to keep the
permissions of slapd.conf. Putting data into the file using shell
redirection recreates the file with default umask and owner, killing
the permissions we applied using chod --reference after creating the
file. Instead we change the permissions directly before renaming the
file now. Wrapped it into a function and update the owner as well.
How do we do this correctly for ACLs etc.!? Thanks to Carlo Contavalli
for pointing this out.
* servers/slapd/main.c: Log a warning if writing the pidfile or writing
the arguments file fails (closes: #261696).
* debian/control: Add missing build dependency for perl development
library (closes: #297123).
.
openldap2.2 (2.2.23-0.pre2) experimental; urgency=low
.
* servers/slurpd/slurp.h: Relocate the default spool directory to
/var/spool/slurpd again.
* Merged some changes done by Fabio M. Di Nitto for the ubuntu
distribution (thanks, Fabio!):
+ debian/slapd.{postinst,conf}: Checkpoint BDB databases every 512kb
or 30 minutes by default.
+ debian/slapd.scripts-common: Make is_empty_dir less noisy on first
install (cosmetic).
* Applied some changes suggested by Ondrej Sury:
+ debian/rules: Add MAKEVARS variable and set datadir =
/usr/share/libldap2.2/ucdata instead of changing build/top.mk as
suggested.
+ debian/move_files: Install /usr/share/libldap2.2 into libldap2.2
and remove duplicate ldap.conf manpage.
+ debian/control: Let libldap2.2 dependon libldap2 for config files.
* Also in Ondrej's patch:
+ doc/man/man8/slapd.8: Refer to slapd.conf instead of ldap.h for
loglevel documentation. Changed by ubuntu? I don't know...
* debian/slapd.README.Debian: Update TLS/SSL information.
.
openldap2.2 (2.2.23-0.pre1) experimental; urgency=low
.
* Merge new upstream release 2.2.23.
* Change name of source package to openldap2.2.
* configure.in: Fix AC_LIBOBJ for configure2.50.
* Run libtoolize, aclocal-1.4 and autoconf2.50 to get a working
configure script.
* debian/slapd.init: Output failure reasons using "$failure" so that
no glob substitution is done. Had a hard time grokking why slapd
would mention the contents of the current directory in its error
message...
* debian/rules: Disable building -dev packages as we don't want
other packages to link against the new libraries before sarge.
Remove the binary-indep target from the binary dependends list.
* debian/control: Move packages that are no longer build into control-dev.
* debian/configure.options: Build against OpenSSL with --with-tls
(this can only be done for slapd itself, we need GnuTLS support
before enabling this for libldap2.2-dev).
* debian/control: Update build dependencies for libdb4.3 and OpenSSL.
.
openldap2 (2.2.18-0.pre2) experimental; urgency=low
.
* debian/check_config: Make sasl2 check more robust against file
format changes in config.status.
* debian/libldap2.shlibs: Remove.
* Update configure script using libtoolize, aclocal-1.4 and autoconf2.50
to fix wrong shared library dependency in libldap2.2 (depended on
libldap2 by linking against the system's liblber).
* debian/libldap2.README.Debian: Move to libldap2.2.README.Debian.
* Lintian cleanup:
+ Run debconf-updatepo for debian/rules clean and manually as
requested.
+ Update config.guess and config.sub in debian/rules clean as well.
First update done.
+ debian/rules (install): Fix the manpage section of the admin commands
from 8C to 8.
+ debian/rules (binary-arch): Run dh_fixperms to fix the permissions
on shared libraries.
.
openldap2 (2.2.18-0.pre1) experimental; urgency=low
.
* New upstream release.
* Disable TLS for now.
* debian/rules: Don't run autoheader and autoconf.
* debian/configure.options: Recreated and updated for new setup.
* debian/rules: Move slapd, slurpd from /usr/lib to /usr/sbin.
* Rename library packages to include the OpenLDAP version.
* Remove /etc/ldap/ldap*.conf from libldap2.2 to avoid clash with
libldap2. Also add Replaces entry for libldap2 to allow overwriting
for now. Needs fixing...
* Instead of moving slapd from /usr/lib to /usr/sbin create a symlink.
Seems like slapadd etc. are now all included in the slapd binary
and all link to its binary.
* debian/rules: Run dh_link for arch dependend packages.
* configure: Fix broken libdb checking which forced static building of
back-bdb.
* debian/slapd.conf: Fix access directive to use "attrs=" instead of
"attribute=" which wasn't officially supported anyway.
.
openldap2 (2.1.30-3) unstable; urgency=high
.
* Urgeny high since previous releases were hardly usable (at least
with TLS).
* Roland Bauerschmidt <rb at debian.org>
+ libraries/libldap/gnutls.c, libraries/libldap/tls.c,
include/ldap_pvt_gnutls.h: Use callback with
gnutls_certificate_set_params_function to generate dh_params and
rsa_params (this is also the way, it's done with OpenSSL). We need
GNUTLS 1.0.9 for this. With the new version of libgcrypt, we also
need to initialize threading explicitly. The previous
segmentation faults resulted from the *global* param structure
being recreated and freed for every session. Many thanks to
Matthias Urlichs who helped debugging a lot and also packaged
GNUTLS 1.0.16 very quickly... Closes: #244827.
+ debian/control: Add build dependency to libgcrypt11-dev (we're
initializing it directly now) and change libgnutls10-dev to
libgnutls11-dev.
+ libraries/libldap/gnutls.c: in tls_gnutls_need_{dh,rsa}_params
(formerly ldap_gnutls_need_...), create temp files more securely,
doing unlink before opening and opening them with O_EXCL. This is
necessary because under Linux 2.6 all threads have the same PID.
Thanks to Andrew Suffield for pointing this out.
+ debian/slapd.cron.daily: cron job to remove GNUTLS rsa_export and
dh param cache files every day.
+ debian/slapd.README.Debian: add note that we use GNUTLS rather
than OpenSSL.
.
openldap2 (2.1.30-2) unstable; urgency=low
.
* Roland Bauerschmidt <rb at debian.org>
+ debian/slapd.scripts-common: add missing space before !
Closes: #251036, #253633, #257513.
* Torsten Landschoff <torsten at debian.org>
+ Applied patch by Ralf Hack to support non-standard config file
location in /etc/default/slapd (closes: #229195).
+ Applied patch to fix handling of abandoned commands
(closes: #254183). Thanks to Peter Marschall for submitting it.
+ Applied patch to fix memory leak after search (closes: #254184).
Thanks again, Peter!
+ Applied trivial patch to support logging to DAEMON facility
as well as LOCAL* (closes: #254186). Here you are, Peter ;)
.
openldap2 (2.1.30-1) unstable; urgency=low
.
* Torsten Landschoff <torsten at debian.org>:
+ debian/control: Have slapd conflict with libltdl3 version 1.5.4-1
as with that version loading of .so files is broken which breaks
slapd (closes: #249152).
+ Applied patch to fix Perl backend (closes: #245347). Kudos
to Peter Marschall.
+ debian/configure.options: Enable building of Perl backend.
.
* Roland Bauerschmidt <rb at debian.org>
+ debian/slapd.templates: replace 'domain' with 'DNS domain name'
which is little more specific
+ debian/slapd.config: check if the domain has a valid syntax to
prevent slapadd from failing. Closes: #235749.
+ New upstream version with fix for NS-MTA-MD5 hash length
checking. Closes: #226583.
.
openldap2 (2.1.29-2) unstable; urgency=low
.
* Roland Bauerschmidt <rb at debian.org>
+ debian/rules: Revert change to install ldapadd as symlink.
Somehow, with that change, ldapadd didn't get installed at all.
Closes: #243537.
.
openldap2 (2.1.29-1) unstable; urgency=low
.
* Stephen Frost <sfrost at debian.org>
+ libraries/gnutls.c: Generate and store RSA/DH parameters,
based off a patch by Petr Vandrovec (though changed alot).
Closes: #234639, #234593
.
* Roland Bauerschmidt <rb at debian.org>
+ Merged new upstream release.
+ debian/slapd.prerm: add #DEBHELPER# token.
+ debian/control: have slapd depend on debconf (>= 0.5) to ensure
it supports the seen flag.
+ debian/rules: ldapadd is installed as a hardlink to ldapmodify;
use a symlink instead.
+ debian/slapd.{scripts-common,postinst,preinst,config}: Add new
function read_slapd_conf that evaluates include statements.
.
openldap2 (2.1.26-1) unstable; urgency=low
.
* Torsten Landschoff <torsten at debian.org>:
+ Merged new upstream release.
+ debian/slapd.templates (slapd/purge_database): Set default value to
false.
+ debian/slapd.config (manual_configuration_wanted): Don't exit
from the script directly if the user wants to configure
slapd manually (exit 0 -> return 0).
+ Build-depend on libgnutls10-dev instead of libgnutls7-dev and
rebuild (closes: #233833).
+ Move previous content of /var/lib/ldap away during creation of
an initial directory (closes: #228886, #233512).
+ debian/slapd.postrm: Remove flag files in /var/lib/slapd on purge.
+ Removed functionality (verbose error messages) from gnutls.c until
it compiled with libgnutls10-dev :-((
+ debian/slapd.postinst: Overwrite existing /etc/ldap/slapd.conf (only
reached during initial installation/dpkg-reconfigure).
.
openldap2 (2.1.25-1) unstable; urgency=low
.
* Roland Bauerschmidt <rb at debian.org>:
+ New upstream version.
- Build against libdb4.2. Hopefully, this resolves the BDB
lock ups when configured improperly.
+ debian/control: Have ldap-utils depend on the same version of
libldap2, and libldap2 conflict with ldap-utils (<= 2.1.23-1).
Closes: #216661.
+ debian/slapd.{templates,config}: Check if there are slave
databases in slapd.conf lacking an updateref option, and warn
about it. Closes: #216797.
+ debian/slapd.{templates,config,postinst,conf}: Ask which
database backend to use (BDB or LDBM).
+ debian/slapd.README.Debian: cleanup
+ servers/slapd/back-bdb/dbcache.c: Turn off subdatabases. This
is an incompatible database format change, but according to
Howard Chu "using them (subdatabases) is known to cause deadlocks
on multiprocessor machines, among other issues."
+ debian/control: add Recommends: db4.2-util to slapd
+ debian/control: add Recommends: libsasl2-modules to slapd and
ldap-utils. Closes: #224058.
+ debian/slapd.{scripts-common,preinst,postinst}: Extended dump
and restore code to deal with different versions for different
backends.
+ debian/control: Geez, centipede seems to have vanished a long
time ago. So don't claim it's included in the slapd package.
+ debian/slapd.docs: created with servers/slapd/back-sql/
rdbms_depends. Closes: #225807.
* Torsten Landschoff <torsten at debian.org>:
+ debian/move_files: Install slappasswd into ldap-utils instead
of slapd as it's useful without slapd as well (closes: #228705).
+ debian/control: Make ldap-utils Replaces: slapd < 2.1.25 because
of that change.
+ debian/control: Use libdb4.2-dev instead of libdb4.1-dev as a
number of problems seem to be related to DB 4.1.
.
openldap2 (2.1.23-1) unstable; urgency=low
.
* Roland Bauerschmidt <rb at debian.org>:
+ New upstream version.
+ Applied fix for admin password breakage from Michael Beattie
<mjb at debian.org>. Closes: #214270.
+ Added Dutch Debconf template translation by cobaco at linux.be.
Closes: #215373.
+ Bumped Standards-Version (no changes needed).
* Torsten Landschoff <torsten at debian.org>:
+ debian/move_files: Install slappasswd into ldap-utils instead
of slapd (closes: #228705).
.
openldap2 (2.1.22-3) unstable; urgency=low
.
* Call perl -w to run debian/dh_installscripts-common. Closes: #214054.
.
openldap2 (2.1.22-2) unstable; urgency=high
.
* Stephen Frost <sfrost at debian.org>
+ servers/slapd/daemon.c: Apply patch from head for select handling.
+ debian/rules: Fix build options to optimize correctly and to use
DEB_BUILD_OPTIONS (Policy, 10.1). Closes: #202306
+ debian/slapd.conf: Add in ACL for root DSE explicitly.
+ debian/slapd.init: Add --oknodo in stop_slurpd. Closes: #202592
+ debian/rules: Need quotes around $(CFLAGS) on configure line.
+ debian/slapd.init: Remove \'s before quotes around pidfile.
+ debian/slapd.init: Add support for -h slapd flag. Closes: #201991
+ debian/slapd.default: Add variable $SLAPD_SERVICES for slapd -h.
+ libraries/libldap/tls.c: Apply patch from asuffield in #202741 to
fix subjectAltName usage. Closes: #202741
.
* Torsten Landschoff <torsten at debian.org>:
+ Fix invocation of "head" in maintainer scripts and replace usage of
[ foo -a bar ] by [ foo ] && [ bar ] (closes: #203292).
+ debian/slapd.postrm: Small cleanup, only remove the directory, not
the backups, on purge.
+ debian/rules: Don't run the upstream install target if we did not
rebuild the whole tree. Makes debugging maintainer script much more
tolerable.
+ debian/slapd.config: Cleaned up and restructured for readability.
+ debian/slapd.templates: Replaced the invalid_suffix template with
invalid_config which is more general and can be used for any
inconsistency in the initial configuration.
+ debian/slapd.postinst: Rewritten to eliminate all that spaghetti.
Did not yet implement all old features again...
- Now the #DEBHELPER# part is always reached so that the daemon
will be restarted even if no automatic configuration is wanted
(closes: #204008).
+ Fixed the undefined symbols in libldap_r.so.2 (closes: #195990).
| configure.in: Try -lpthread before -pthread to link the thread
library. libtool does not pass -pthread through, -lpthread seems
to work though.
| libraries/libldap_r/Makefile.in: Add $(LTHREAD_LIBS) to
UNIX_LINK_LIBS so that pthread is linked when creating a shared library
as well.
.
* Roland Bauerschmidt <rb at debian.org>:
+ debian/configure.options: change --localstatedir=/var/lib to
--localstatedir=/var/run. Since localstatedir isn't used anywhere
in the code, except for the ldapi socket (and examples in the
manpages which are correct at the moment anyway), all this change
does should be changing the default location of the ldapi socket
from /var/lib/ldapi to /var/run/ldapi. Closes: #160965.
+ libraries/libldap/tls.c: In get_ca_list, walk through CACERTDIR
manually if building against GNUTLS (since there is no equivalent
to SSL_add_dir_cert_subjects_to_stack). Closes: #205609.
+ debian/slapd.preinst: create /var/backups/ldap/$oldver with
permissions 0700. Also change permissions for /var/backups/ldap
to 0700 if it already exists. Closes: #209019.
+ Added Japanese translation of Debconf templates by Kenshi Muto
<kmuto at debian.org>. Closes: #210731.
+ debian/slapd.{postinst,preinst,config}: Replaced duplicate
implementations of the same functions with one version and moved
those into debian/slapd.scripts-common which will be included by
debian/dh_installscripts-common.
+ debian/slapd.preinst: before dumping the database, check if the
backend is supported
+ debian/slapd.postinst:
- add -q to grep call for allow bind_v2
- readded pre-2.1 (woody) upgrade path (that is, dumping, fixing
and reimporting the database)
.
openldap2 (2.1.22-1) unstable; urgency=low
.
* Stephen Frost <sfrost at debian.org>:
+ New upstream version (minor changes).
+ debian/control: Change build-deps to autoconf2.13, Closes: #201482
+ debian/rules: Add dh_compress -i for binary-indep.
+ debian/slapd.postinst: Give variable for read (avoids bashism).
+ configure/.in: Use upstream's version of back-meta/back-ldap fix.
.
openldap2 (2.1.21-2) unstable; urgency=low
.
* Stephen Frost <sfrost at debian.org>:
+ debian/slapd.preinst: slapcat here if possible, if slapcat not
available then slapcat in postinst. Also remove old unused
function.
+ debian/slapd.postinst: Check if slapcat in preinst worked and use
those results in preference. Also moved to using /var/backups/ldap.
+ servers/slapd/daemon.c: Provide more information on socket/bind
failures. Patch submitted upstream. Closes: #94967.
+ ./configure, ./configure.in: Fix check for back_ldap in back_meta.
back_ldap now included as module. back_ldap and back_meta appear
to load fine, though order may matter. Closes: #196995.
+ debian/control: Add versioned Depends on perl, need recent version
for migration script.
+ debian/slapd.{pre,post}inst: Allow for whitespace in postinst
before database definitions
+ debian/control: Drop the libldap2-dev Depends that aren't actually
necessary.
+ debian/slapd.preinst: Add create_sed_script to create the script to
deal with multi-line commands in slapd.conf. Modify things to use
sed script to preprocess slapd.conf before using it. Remove
support for whitespace preceeding commands.
+ debian/slapd.postinst: Add create_sed_script here too and modify
everything to use it as necessary. Also change everything to
reference $SLAPD_CONF instead of /etc/ldap/slapd.conf everywhere.
Remove support for whitespace preceeding commands.
+ debian/slapd.postinst: Removed all tabs. Changed all sed scripts
to used [:space:] instead of [space tab].
+ debian/slapd.postinst: Removed debugging statements from ldap_v2
support handling code.
+ debian/slapd.preinst: Changed to use mktemp for sed script.
+ debian/slapd.postinst: Changed to use mktemp for sed script.
+ debian/slapd.config: If no hostname set just use debian.org.
+ contrib/ldapc++/config.{sub,guess}: Resync back to upstream, no
reason not to, we don't even build this stuff...
+ debian/control: Change build-depends to libgnutls7-dev instead of
libssl-dev.
+ debian/rules: Now run autoconf && autoheader to pick up on the
configure.in changes needed for GNU TLS.
+ debian/copyright: Added Steve Langasek (SL) copyright statement.
+ Patch from Steve Langasek for GNU TLS support, Closes: #198553
| include/ldap_pvt_gnutls.h: Added for GNU TLS
| configure.in: Now uses GNU TLS where available.
| servers/slapd/schema_init.c: Modified for GNU TLS- some functions
removed because GNU TLS layer does not support them yet.
| build/install-sh: Added for new autoconf.
| libraries/libldap/Makefile.in: Changed to compile GNU TLS portions.
| libraries/libldap/getdn.c: Stub function added, GNU TLS layer does
not support TLS certificates for authentication yet.
| libraries/libldap/tls.c: Now calls GNU TLS functions instead of
OpenSSL.
| libraries/libldap/gnutls.c: Added to support GNU TLS in place of
OpenSSL for TLS connections.
| libraries/libldap_r/Makefile.in: Changed to compile GNU TLS portions.
+ debian/slapd.postinst: remove temp file if upgrading or doing a
reconfigure but the OLDSUFFIX and basedn match so that we do not
move an empty file overtop of slapd.conf. Closes: #190797.
+ debian/slapd.init: Inform user when not starting slapd due to
no configuration file found. Deals with users who select to not
configure slapd during installation.
+ debian/slapd.init: Removed cat <<-EOF and got rid of associated
tabs; best to not depend on tab vs. space distinction.
+ debian/slapd.config: Change debconf question names to be fully
qualified in the $var from the for loop- organization is under
shared/ and domain is under slapd/, not both under slapd/.
+ debian/slapd.postrm: Can not depend on debconf being around in
postrm so check before attempting to source it. Also protect
against failure from db_get.
+ debian/slapd.postinst: Check for old directory and move it out
of the way if it exists on new configure or reconfigure.
+ debian/slapd.postinst: Fix db_input's for error messages,
should be high priority and need to || true them.
+ debian/slapd.postinst: Do not error exit once we've told the
user about the problem, if there was one, with slapcat/slapadd.
+ debian/slapd.postinst: Make sure we get the organization before
we attempt to fix_ldif on old slapcat output. Default to unknown
if the organization is not set.
+ debian/slapd.postinst: Be sure that slapd has been stopped before
attempting to fix and slapadd old slapcat.
+ debian/slapd.postinst: Do not use --exec with s-s-d in postinst.
+ debian/slapd.postinst: grep calls need to be || true'd when no
matching lines found is possible (this case is handled).
+ debian/slapd.postinst: Be very sure slapd has stopped before
attempting to upgrade database.
+ debian/slapd.preinst: Use either the pidfile or exec if pidfile
is not available when stopping. Do not put \"\" around pidfile.
Use $oldver instead of $2.
+ debian/slapd.config: Reask questions on a reconfigure. Use the
same logic as slapd.postinst for when to ask questions regarding
the db. Be sure to db_go after db_input's.
+ debian/slapd.templates: Fix allow_bind_v2 short description to
make more sense since the default is off.
+ debian/slapd.preinst: Use perl instead of sed for handling conf.
+ debian/slapd.postinst: Use perl instead of sed for handling conf,
use old sed method to insert \n's, user invoke-rc.d when slapd
needs to be stopped. Assume preinst shuts slapd down for upgrade.
+ debian/slapd.postinst: Only stop slapd on reconfigure.
.
* Torsten Landschoff <torsten at debian.org>:
+ doc/man/man8/slapd.8: Refer to slapd.conf(5) for a description of
the debugging level (closes: #176980).
+ debian/move_files: Kill of the static archives of our backend
modules as they are of absolutely no use.
.
* Steve Langasek <vorlon at debian.org>:
+ debian/slapd.postinst: Add a new function, get_database_list, that
prints out the list of configured databases from slapd.conf
one row at a time. Move all of the upgrade handling into a
loop, and iterate through the configured databases. Since the
while loop is in fact a subshell, be sure to handle errors
correctly. We also have to look at the configured directory
for each database, instead of assuming /var/lib/ldap.
Closes: #190155, #190156.
+ debian/slapd.preinst: Simplify the handling of error status: if
the slapcat fails, just remove the ldif file. Also, add the
suffix to the name of the output file, and add the
get_database_list function here as well.
.
* Roland Bauerschmidt <rb at debian.org>:
+ debian/rules: call dh_makeshlibs with -plibldap2 rather than just
with libldap2
+ debian/slapd.postinst: Add question about no configuration.
+ debian/slapd.templates: Add template for no config question.
+ debian/slapd.templates: Add template for invalid suffix.
+ debian/slapd.config: Add no configuration option. Closes: #87986
+ debian/slapd.config: Complain to the user on invalid domain/org.
.
openldap2 (2.1.21-1) unstable; urgency=low
.
* Torsten Landschoff <torsten at debian.org>:
+ Merged new upstream release.
* Stephen Frost <sfrost at debian.org>:
+ debian/control: Add libbind-dev and bind-dev to the conflicts for
slapd, the libs in them can end up being used even when not
compiled against causing getaddrinfo() to fail. Closes: #166777
+ debian/copyright: Flush out the copyright file to include all found
copyrights and updates to those.
+ debian/copyright: Add clarification of MA license
+ debian/copyright: Add clarification of JC license
+ debian/slapd.templates: More clearly inform users of important
config change. Closes: #194192.
+ debian/control: Remove patch from build-depends (dpkg-dev depends on it)
+ debian/fix_ldif: Correctly handle base64-encoded DNs. Closes: #197014.
+ debian/slapd.templates: Added templates for asking about LDAPv2 support
and telling the user of slapcat/slapadd failures during upgrade.
+ debian/slapd.postinst: Added support for adding LDAPv2 support
+ debian/slapd.postinst: Modified to handle slapcat/slapadd failure.
In the event of an upgrade failure the database will be left untouched
and the user notified. Closes: #192431
+ debian/slapd.postinst: Use ldif_dump_location in more places...
+ debian/slapd.prerm: Check if upgrade failed and assume bad old init.d
script was used and attempt to shut down slapd with --oknodo in case
slapd isn't running. Closes: #193854. (Again)
+ debian/slapd.conf: Add commented out allow line
+ debian/rules: Tell dh_installinit to not touch slapd.prerm now.
+ debian/slapd.postinst: Do a dry-run with slapadd first and check if
that worked or not. If it did not work then tell the user, otherwise
do a real slapadd which should work.
+ debian/slapd.postinst: Make sure slapd is stopped before doing
slapadd/slapcat's and the like. (Note: The woody version does not
stop slapd). Closes: #189777.
+ debian/slapd.postinst: Check if directories exist before attempting
to mkdir them. Closes: #189947
+ debian/slapd.README.debian: Add note about runlevel issue.
Closes: #175736
+ debian/move_files: Copy ldiftopasswd into /usr/share/slapd for users
to use, if they find it useful. Closes: #94963.
+ debian/slapd.README.Debian: Added note about ldiftopasswd.
.
* Roland Bauerschmidt <rb at debian.org>:
+ debian/slapd.postinst: fixed typos and check for the existence of
slapd.conf before reading it.
.
openldap2 (2.1.17-3) unstable; urgency=low
.
* Stephen Frost <sfrost at debian.org>:
+ debian/slapd.init: Add --oknodo for stopping slapd. Closes: #192423, #193854.
+ debian/slapd.init: Change START_SLURPD to SLURPD_START. Closes: #190724.
+ debian/libldap2.shlibs: Bump to 2.1.17- 2.1.12 never hit the archive.
These should only be bumped when new symbols are added so we should
figure out a way to handle checking that.
+ debian/slapd.dirs: Added /var/run/slapd for pidfile
+ debian/slapd.conf: Moved pidfile to /var/run/slapd; Needed if running
non-root.
+ debian/slapd.conf: Clean up config file, be more explicit about what
directives are 'general', 'backend', and 'database'. Moved and
commented out 'replogfile' since it is database specific, wasn't doing
anything where it was and use of it depends on slurpd usage.
I consider this solving #151511 since we don't ask if you want to use
replication anymore anyway. Closes: #151511
+ debian/copy_slapd_dev_files: Added to copy the include files for
building slapd back-ends.
+ debian/control: Add warning about libslapd2-dev
+ debian/control: Add build-depend on po-debconf for dh_installdebconf
+ debian/slapd.default: Add option for settings SLAPD_CONF file
+ debian/slapd.init: Changed to use SLAPD_CONF, setting it to
/etc/ldap/slapd.conf if it is not specified. Closes: #91318
+ debian/control: Added libslapd2-dev to control file. Closes: #192163.
+ debian/rules: Added binary-indep to the binary: build line and flushed
it out to build the libslapd2-dev deb. Added -k to dh_clean since we're
building arch and indep debs now.
+ Maintainer upload, acknowledge NMU. Closes: #98039.
+ Add debian/po/fr.po from 194740. Closes: #194740
+ Add space before ']' on line 113 of postinst. Closes: #194192, #194943
.
* Torsten Landschoff <torsten at debian.org>:
+ debian/control: Enforce libldap2 to be the same version as slapd
as slapd (legitimately) uses internal functions of that library
(closes: #190164).
+ debian/slapd.postinst: Fix the regexp for finding the database
definitions.
.
* Steve Langasek <vorlon at debian.org>:
+ debian/slapd.preinst: don't use debconf or ldapsearch in the
preinst, as this is a policy violation (even if a previous
version was installed, it could've been removed-but-not-purged).
Closes: #189811, #195029.
+ debian/slapd.{pre,post}inst: dump & fix up the directory in the
postinst, not in the preinst -- using slapcat/slapadd, not
ldapmodify. This ensures that the dump will succeed whenever the
database is present, rather than depending on access to an admin
dn. Closes: #190085.
+ debian/fix_ldif, debian/move_files, debian/copyright: add Dave
Horsfall's dn-fixing script, to handle objectClass upgrading
+ debian/slapd.postinst: Skip the duplicate prompting for the
organization name; we're guaranteed to always have one.
.
openldap2 (2.1.17-2) unstable; urgency=low
.
* The who-says-slavery-is-dead upload.
* Steve Langasek <vorlon at debian.org>:
+ debian/slapd.postinst: Fix the database regexp.
+ debian/slapd.postinst: Only add moduleload lines *once* on upgrade
from 2.0. Wrap the backup code with a check for
/var/lib/slapd/upgrade_2.0, to guarantee idempotency.
Closes: #190401.
+ debian/slapd.{config,templates,postinst}: On dpkg-reconfigure,
don't wipe out an existing config; only merge in any requested
changes. Also, prompt before wiping out the existing db.
Closes: #190799.
+ debian/slapd.{postinst,examples},debian/rules: Move slapd.conf
from doc/slapd/examples to /usr/share/slapd, per policy.
+ debian/slapd.postinst: make sure slapd.conf is always created
atomically.
+ debian/slapd.postrm: If removing databases on package purge,
remove any database backups as well.
* Torsten Landschoff <torsten at debian.org>:
+ debian/configure.options: Disable ACIs because they are still
experimental.
+ debian/control: Change section and priority of libldap2-dev to
libdevel and extra respectively (dinstall message).
+ debian/slapd.preinst: Only query the object classes of the root
dn if there was no error parsing the config.
+ Update templates for po-debconf using the patch submitted by
Andre Luis Lopes (closes: #189933).
+ Use [[:space:]] instead of [\t ] in sed invocations since the
latter does not seem to work (reported by Daniel Lutz).
+ debian/control: Add Replaces: entry for openldapd since ldif.5.gz
was included in the potato package of that name (closes: #190660).
+ debian/control: Tighten the build dependency on libtldl3-dev as
versions before 1.4.3 required the .la file for dynamic binding
(thanks to Josip Rodin for pointing this out).
.
openldap2 (2.1.17-1) unstable; urgency=low
.
* New upstream release.
* Torsten Landschoff <torsten at debian.org>:
+ debian/slapd.init: Improve the error reporting. If nothing is output
by the failing command don't leave the user alone but print a hint
to look into the logfile etc.
+ debian/control: Require at least version 2.1.3 of libsasl2-dev
as this is what the configure script checks for. Pointed out by
Norbert Tretkowski.
+ debian/slapd.{pre,post}inst: Small cleanups, added some comments,
adapted for the removal of the .la files in slapd package.
.
openldap2.1 (2.1.16-1) unstable; urgency=low
.
* New upstream release.
+ build/top.mk: Remove patch to omit "-static" at linking time. Upstream
now respects the --enable-shared flag used at configuration time.
+ debian/slapd.postinst: Automagically add the module load directives
after upgrade as needed.
+ debian/slapd.config:
- Only ask questions to create a new directory on fresh install.
- Ask wether the right modules should automatically be loaded in
slapd.conf.
+ debian/slapd.templates: Add the templates for autoloading modules
and fixing the directory.
+ debian/slapd.preinst: New script to support upgrading from 2.0.
The old prerm did not stop the daemon so we have to do it here.
Also a first attempt to fix broken LDAP directories not acceptable
to 2.1.
- Conditionally load debconf when upgrading as it only has to
be available in that case.
+ debian/slapd.preinst: Dump database before upgrade.
+ debian/slapd.postinst: Recreate database from dump after upgrade.
Move old database out of the way.
.
* Roland Bauerschmidt <rb at debian.org>
+ debian/slapd.README.Debian: mention that backend database modules are
now compiled as shared objects
.
* Stephen Frost <sfrost at debian.org>
+ debian/slapd.conf: Drop the '.la' file extension
+ debian/move_files: Drop and rm the .la files, they aren't necessary.
+ debian/slapd.README.Debian: Dropped the .la from the module_load line.
+ servers/slapd/daemon.c: check slapd_srvurls is not NULL before
deref; included in upstream CVS.
+ servers/slapd/back-*/init.c: Change the munged symbol names to
init_module, they do not need to be munged, and cause problems when
they are and not using .la files (which cause other problems)
+ servers/slapd/module.c: Change to use lt_dlopenext() so we don't
need the .la files
.
openldap2.1 (2.1.12-1) experimental; urgency=low
.
* Initial release of OpenLDAP 2.1 packages. Closes: #167566, #178014.
- this includes support for the >= and <= operators. Closes: #159078.
- fixes various upstream bugs. Closes: #171008.
.
* Torsten Landschoff <torsten at debian.org>
- debian/check_config: Added script to check if OpenLDAP was configured
the way we want it.
- Don't build special TLS packages anymore - SSL is enabled in the
stock ldap library. Everything else will just give me more headaches.
- Build against libsasl2 instead of libsasl1. Closes: #176462.
- debian/control:
- Build-depend on debhelper 4.0 as debian/rules uses DH_COMPAT=4.
- Depend on coreutils | fileutils. Closes: #175704, #185676.
- Make libldap2 conflict with libldap2-tls which is obsolete now.
- debian/rules: Move the long list of configure options to a new
file debian/configure.options and read $(CONFIG) from that file.
- configure with --enable-aci. Closes: #101602.
- debian/slapd.init: Rewrite and add comments.
- Add support for running as non-root (closes: #111765, #157037).
- servers/slapd/main.c (main): Remove pid file on exit (closes: #162284).
- servers/slurpd/slurp.h: Change the default spool directory to
/var/spool/slurpd (avoids passing it via -t in init.d).
- servers/{slapd,slurpd}/Makefile.in: Install binaries into sbindir
instead of libexecdir.
- debian/control: Add Stephen Frost to the Uploaders field. Thanks
for your help, Stephen!
- contrib/ldapc++/config.{guess,sub}: Replaced with current files from
autotools-dev (lintian). Not actually neccessary since this part of
the package is not currently built but I think this is the best way
to shut up lintian :)
- build/mod.mk: Use -m 644 instead of -m 755 in installing shared
libraries. Shared libraries should not be marked as executable
(lintian).
- debian/libldap2.conffiles: Remove, since we are using version 4
of debhelper which tags everything in /etc as conffile by default.
- debian/rules: Change the mode of everything upstream installed into
/etc to 0644 as required by policy (lintian).
- debian/rules: Call dh_installdeb later in the binary target so that
the conffiles are already there for listing. Without this nothing in
/etc gets tagged as conffile... (lintian).
- debian/rules: Pass the start and stop priority of slapd to
dh_installinit in preparation for a postinst supported by debhelper.
- debian/rules: Call dh_installdirs again.
- Rewrite slapd.config, slapd.postinst, slapd.templates - a first try
in getting slapd to configure itself. Way to go.
.
* Roland Bauerschmidt <rb at debian.org>
- debian/control:
- build-depend on libdb4.1-dev instead of libdb4.0-dev
- conflict, replace, and provide libldap2-tls (libldap2)
- removed ldap-gateways binary package
- drop suggestion to obsolete openldap-guide. Closes: #171894, #146968.
- debian/rules:
- build with BDB backend
- run dh_installdeb
- only run dh_makeshlibs for libldap2
- debian/slapd.dirs: added to create /var/lib/ldap and /var/spool/slurpd
- debian/slapd.postinst:
- properly remove temporary files on errors. Closes: #160412.
- install init.d link if slapd.conf already exists. Closes: #159542.
- run db_stop even if package isn't configured for the first time. This
prevents hanging during upgrades.
- added debian/slapd.default and use it from debian/slapd.init.
Closes: #160964, #176832.
- added debian/slapd.README.Debian
- added versioned dependency on coreutils to make lintian quiet.
- added debian/slapd.postrm
- remove slapd.conf when package is purged
- remove /var/lib/ldap when slapd/purge_database is true
- remove /etc/ldap/schema if empty. Closes: #185173.
- debian/templates: added slapd/purge_database template
- build/top.mk: link against libcrypt before other SECURITY_LIBS
- debian/libldap2.shlibs: tighten dependencies. Closes: #181168.
.
* Stephen Frost <sfrost at debian.org>
- debian/control: added libltdl2-dev and libslp-dev to the build-depends
- Correct typo for back-sql init routine; already in OpenLDAP upstream
CVS
- Correct free of SASL interact results; already in OpenLDAP upstream CVS
- Duplicate the DN from SASL to ensure '\0' termination; already in
OpenLDAP upstream CVS
- debian/control: added Replaces: slapd (<< 2.1) for ldap-utils due to
ldif.5 move.
- Add modulepath /usr/lib/ldap to default slapd config
- Add moduleload back_bdb to default slapd config
- Changed libexecdir to ${prefix}/lib
- Add usr/lib/ldap to slapd portion of move_files
- Modified backend types to be built as modules for dynamic loading
- Fixed pt_BR translation
.
openldap2 (2.0.27-3) unstable; urgency=high
.
* [SECURITY]: Apply the patch used by SuSE in SuSE-SA:2002:047
(or rather the parts of it not yet included upstream).
.
openldap2 (2.0.27-2) unstable; urgency=low
.
* debian/control: Make libldap2-dev depend on libssl-dev and
libsasl-dev, since those libs are pulled via the libldap.la file
(closes: #164791).
* debian/control: Add shlibs:Depends to libldap2-tls as well. Most
of those depends are pulled via libldap2 but of course libssl
is not among those. (closes: #169950).
* debian/libldap2-tls: Remove old divertions on "configure" and not
on "upgrade" - the latter is not really called.
.
openldap2 (2.0.27-1) unstable; urgency=low
.
* New upstream release.
.
openldap2 (2.0.23-14) unstable; urgency=low
.
* debian/rules: Remove search paths from .la files using some perl
trickery (closes: #110479).
* debian/libldap2.README.debian: Document the NSS problem which stops /usr
from being unmounted cleanly when using libnss-ldap (for more info
see bug#159771).
* Started cleaning up the maintainer scripts:
- Remove creation of the /usr/doc symlinks (lintian).
- Don't run ldconfig in prerm scripts (lintian).
.
openldap2 (2.0.23-13) unstable; urgency=low
.
* As Ashley Clark found out the preinst of libldap-tls fails for a new
install. My fault - I did not check that (removing ldap is cumbersome
if you are using it... :) and the scripts were only checked without
"set -e" in effect.
+ debian/libldap2-tls.preinst: Apply Ashley's patch (thanks a lot,
Ashley. closes: #162123).
+ Coincidently the other installation scripts seem to be okay, the
failing command is in the middle of a pipe and therefore ignored.
.
openldap2 (2.0.23-12) unstable; urgency=low
.
* Apply the patch from upstream ITS#2012 to support MD5 hashes. Problem
is that OpenSSL comes with its own version of the crypt() function
which is linked in instead of the system's version from libcrypt.
The patch changes the link order so that slapd takes the system's
implementation.
* debian/rules: Pass --enable-crypt-first to configure to enable the
patch (closes: #160763).
* Fix the diversion handling of libldap2-tls:
- preinst: Only install diversions that are not there.
- postrm: Remove this package's diversions.
- postinst: Remove obsolete diversions after upgrade.
- Removal of diversions is done in reverted order of the installation.
* Enable DNSSRV support as requested by Turbo. No Kerberos for now, sorry.
* debian/control: Updates Standards-Version to 3.5.7 and fix running
of ldconfig in maintainer scripts.
.
openldap2 (2.0.23-11) unstable; urgency=low
.
* debian/rules: Build with --with-tls (closes: #80591, #155937).
* debian/control:
+ Add build dependency on libssl-dev.
+ Specify Roland Bauerschmidt as co maintainer.
* Added the trickery to have libldap2 without TLS and libldap2-tls
with the TLS stuff. Otherwise we have to change the base system,
and god knows how long that would take.
Most of the changes done by Roland Bauerschmidt. We now build the
source two times - with and without ssl. We mostly use the ssl enabled
stuff with the exception of a libldap2 package which does not have
support for that. If you need TLS support you have to install
libldap2-tls, which diverts the libraries from libldap2 out of the
way and replaces them with the TLS enabled version.
.
openldap2 (2.0.23-10) unstable; urgency=low
.
* debian/control: Build depend on libdb4.0-dev instead of libdb3-dev.
This should fix the index corruption problems (closes: #152959).
.
openldap2 (2.0.23-9) unstable; urgency=low
.
* debian/slapd.init: Wait for the daemons to actually terminate for
the stop action (which is used for restart) and trap all errors
(closes: #148033).
* debian/rules: Build with -D_FILE_OFFSET_BITS=64 to support files
bigger than 2GB on all architectures (closes: #155197). As off_t is
about never used in the source that should not create any problems.
* debian/control: Make libldap2-dev depend on libsasl-dev
(closes: #135223, #96957).
* doc/man/man1/ldapmodify.1: Fix typo (closes: #105905).
* debian/rules: Create symlinks for some manpages (closes: #99547).
* Fix spelling error in description of ldap-gateways (closes: #124859).
* debian/copyright: Include the full content of the LICENSE file
(closes: #151222).
.
openldap2 (2.0.23-8) unstable; urgency=low
.
* New maintainer.
* debian/control: Build-Conflict with libbind-dev to use the right
resolver library everywhere (closes: #112459). Of course, the
real solution must be to fix the configure script to not detect
libbind-dev and use the right resolver all the time. But a work around
is better than nothing I would say...
.
openldap2 (2.0.23-7) unstable; urgency=low
.
* Add Brazilian translation for debconf templates. Closes: Bug#114021
* Fix hostless LDAP URLs, patch from Lamont Jones. Closes: Bug#140387
.
openldap2 (2.0.23-6) unstable; urgency=high
.
* Make slapd.config idempotent, so that calling it once (during
preconfiguration) and again (during postinst) doesn't break things.
Patch from Anthony Towns. Closes: Bug#137552).
.
openldap2 (2.0.23-5) unstable; urgency=high
.
* Fix slurpd invocation in slapd.init. Closes: Bug#141959
* Ask for admin DN when using LDIF initialization as well.
Lets hope this finally Closes: Bug#137552
* Merge German translation for debconf templates. Closes: Bug#141712
* Add Build-Depends on debconf-utils since we use debconf-mergetemplate
* Remove bogus error from slapd.init. Closes: Bug#137718
.
openldap2 (2.0.23-4) unstable; urgency=high
.
* Only show already-configured note on initial installs. Closes: Bug#137100
* Supply -t option to slurpd when starting it, not when stopping it.
Closes: Bug#136240
* Use db_input instead of db_get for notes in the slapd postinst.
* Only fetch password from debconf when not using ldif initialization.
Closes: Bug#138558,#137552
* Check if slapd.conf exists in slapd postinst. Closes: Bug#138136
.
openldap2 (2.0.23-3) unstable; urgency=high
.
* If can not get a password for the admin entry when installing slapd
generate one randomly. Closes: Bug#134774
* Bump shlibs dependency to 2.0.23
.
openldap2 (2.0.23-2) unstable; urgency=high
.
* Create /var/spool/slurpd and tell slurpd to use that as temporary
directory. Closes: Bug#134564
* Improve debconf prompts a bit. Closes: Bug#134945
* Properly set default value for domain
* Clear crypted password from debconf after creating the LDAP directory
.
openldap2 (2.0.23-1) unstable; urgency=high
.
* Upstream updated config.{guess,sub} so we are back to zero patches
again.
* Apply fix from Klaus Duscher for the missing password problem: the
config script did not check if it was run twice without slapd.conf
being generated in between and would abort with a missing password
error. Closes: Bug#132566
* Change slapd priority for boot sequence to start earlier and stop
later so people can use LDAP for NSS purposes. Closes: Bug#130277
.
openldap2 (2.0.22-2) unstable; urgency=low
.
* Update config.{guess,sub} again. Closes: Bug#131469
.
openldap2 (2.0.22-1) unstable; urgency=low
.
* New upstream version
* Build properly as non-native package
.
openldap2 (2.0.21-3) unstable; urgency=high
.
* Add logic to config and postinst to configure replication as well
* Don't fail in slapd postinst if we can't stop slapd. Closes: Bug#131617
* Change localstatedir to /var/lib
* Remove /var/lib/ldap when purging slapd
* Don't remove user-supplied ldif file after creating the directory
* Set default replogfile
* Fix typo in severity for no_password note
* Encrypt admin password and remove it from the debconf database
.
openldap2 (2.0.21-2) unstable; urgency=medium
.
* Update config.{guess,sub} and forwarded upstream (ITS#1567).
Closes: Bug#131469
* Remove -x from slapd postinst. Closes: Bug#131502
.
openldap2 (2.0.21-1) unstable; urgency=high
.
* New upstream version,
* Update copyright
* Update config.guess and config.sub
* Redone packaging, no more dbs or debhelper
* Drop all patches, they are either unnecessary or alternatives have
been made upstream
.
openldap2 (2.0.14-1) unstable; urgency=high
.
* New upstream version, which includes a billion second bug.
Closes: Bug#111833
* Drop 005_libldbm_dbopen, upgrading the database in place no longer works
with the new db-env code.
* Redo 008_porting_maxpathlen
.
openldap2 (2.0.11-2) unstable; urgency=low
.
* Test if /etc/init.d/slapd is executable when purging slapd.
Closes: Bug#100938
* Update 008_porting_maxpathlen. Closes: Bug#100584
* Don't use four11 as referral example anymore. Closes: Bug#99998
* Fix synopsis of slapindex manpage. Added to 002_man_fixes.
Closes: Bug#98805
* Removed stray backup file from 002_man_fixes
.
openldap2 (2.0.11-1) unstable; urgency=low
.
* New upstream version
* Add autoconf to Build-Depends. Closes: Bug#99440
* Fix new db upgrade patch. Closes: Bug#98853
.
openldap2 (2.0.10-2) unstable; urgency=low
.
* Tighten shlibs dependency to >= 2.0.1-1. Closes: Bug#98683
.
openldap2 (2.0.10-1) unstable; urgency=low
.
* New upstream version
* New maintainer
* Remove useless LINE_WIDTH bit from patch 000_clients
* Patch 004_ssl_fix has been merged upstream, removed
* Redo 005_db3_upgrade
* Rediff all other patches
.
openldap2 (2.0.7-6) unstable; urgency=low
.
* Make sure autoconf is run if configure.in is changed (for Hurd patch),
closes: #96145
* Fix slapd.postinst in the case of using an ldif file, closes: #95600
* Use a var for slapd.conf in slapd init script. Partially fixes bug
91318.
* Fixed hurd patch for strrchr in replog.c, closes: #93605
.
openldap2 (2.0.7-5) unstable; urgency=low
.
* Fixed db3 upgrade code, closes: #92331, #92916
* m68k should compile fine with db3 now, closes: #90165
* Included provided patch for Hurd compilation, closes: #88079
.
openldap2 (2.0.7-4) unstable; urgency=low
.
* slapd.conf is no longer a conffile, and not provided by the package.
Instead, it is only generated. closes: #81359
* Fixed by previous upload, closes: #71852, #78950, #82491
* Actually install the netscape schema, closes: #90323
* Add comment to README.Debian about being compiled with libwrap,
closes: #84954
* Provide example sasl config file, closes: #90855
* Conflict replace openldap-utils (ldap-utils), and libopenldap-dev
(libldap2-dev), closes: #71471
* Revert to using some code to upgrade previous db's. Remove slapd's dep
on db3-util, and remove postinst code that upgrades the db's.
.
openldap2 (2.0.7-3) unstable; urgency=low
.
* netscape-profile.schema: new schema for old roaming support
* 004_ssl_fix.diff: Fix for SSL support (not compiled in, but some
people use it).
* slapd.config: FINALLY fix the "dc=" base bug.
* Build-Depend on libdb3-dev now that it is available.
* Now that we use db3, make sure we upgrade existing databases to the
db3 format with db3_upgrade.
.
openldap2 (2.0.7-2) unstable; urgency=low
.
* slapd.postinst: fix debhelper wraper so it gets the right @argv,
closes: #71854
* sendmail appears to be compiled against glibc2.2/libdb2 now,
closes: #71602
* %strace ldapsearch cn=admin | & grep /etc | grep ldap
open("/etc/ldap/ldap.conf", O_RDONLY) = 3
closes: #71716
* ldap_first_attribute.3: s/ber_free(3)/ber_free/. closes: #76719
* init.d/slapd: fix reference to pidfile, and also remove the pidfile
after killing the daemon, closes: #77633, #77635
* Fix fgets buffer size thinko in slurpd. closes: #78003
* slapd.8: s/ldap.h/slapd.conf(5)/. closes: #80457
.
openldap2 (2.0.7-1) unstable; urgency=low
.
* New upstream
* Removed hack for shlibs now that dpkg 1.7 is available, added dpkg-dev
1.7.1 to build-depends.
* start using DH_COMPAT=2
.
openldap2 (2.0.2-2) unstable; urgency=low
.
* Recompile against libdb2/glibc 2.1.94/sasl
.
openldap2 (2.0.2-1) unstable; urgency=low
.
* New upstream version, includes some patches from me that fix some
stability issues
* debian/control:Build-Depends: change libwrap-dev to libwrap0-dev for
clarity, closes: #71366
* debian/rules: make sure mail500 docs do not get installed under bogus
subdirs, closes: #71473
* debian/README.build,debian/scripts/dbs-build.mk: Fix and document
build system better, closes: #71584
* debian/local/slapd.conf: Setup default ACL's to work with openldap2
correctly, closes: #71127, #71131
* debian/README: document how to access OpenLDAP 1 servers via
ldap-utils, closes: #71469
* debian/rules:CFLAGS: add -I/usr/include/db2 to make sure we get the
right <db.h> header, closes: #71470
* I cannot reproduce this. In debian/rules I have done exactly what is
needed to keep it from happening, and sparc, i386 and powerpc builds
do not show it, closes: #71472
.
openldap2 (2.0.1-2) unstable; urgency=low
.
* Fixed up depend for libldap2 on itself
.
openldap2 (2.0.1-1) unstable; urgency=low
.
* New upstream version
* Added libsasl-dev to build-deps, closes: #70923
.
openldap2 (2.0-1) unstable; urgency=low
.
* Initial release of OpenLDAP 2 test code
Files:
1e97b7e2170d0df2d19b867d01ee9fe0 469197 net optional openldap2.2_2.2.23-1.diff.gz
51d1cf0a8f77f5cd27a5aa2b82a344ec 2600908 net optional openldap2.2_2.2.23.orig.tar.gz
9df8a320a84775935f109fc8e661831d 999 net optional openldap2.2_2.2.23-1.dsc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iQEVAwUBQl7zUQF4adwMEr3XAQJY3Qf+OZoM1U2qNjs9/sPjCDXD3kuovFlyk7so
jGhSfaUfgwv0C8LxLuRGmjavLqtqCNEDKejMgR14g3sytT1IBJksk09CRPFrnErA
9g/4mqbsBlEPKNnHtBdkQpoOE9cYcI9nQEPhi+rwRB39RtSMDD9vyuu0YWkpjxJ5
IvZJkUsuqeIt3H5AmlnAMboNquikHKUslGOubmI79U8P9PwxwBcavKVmsU4blpiV
gtcW7sCqyDLCgQ6+CL2VmB1wqhLJ0YcdLBH0rrx1hTxlgLeBJvteyqGLF0lnI1ii
ws7AwZIiwVegS79GhaUKyp4aTmuNBFwC3f6HdC+w99/t8sWALgZUPg==
=/olV
-----END PGP SIGNATURE-----
Accepted:
openldap2.2_2.2.23-1.diff.gz
to pool/universe/o/openldap2.2/openldap2.2_2.2.23-1.diff.gz
openldap2.2_2.2.23-1.dsc
to pool/universe/o/openldap2.2/openldap2.2_2.2.23-1.dsc
openldap2.2_2.2.23.orig.tar.gz
to pool/universe/o/openldap2.2/openldap2.2_2.2.23.orig.tar.gz
More information about the breezy-changes
mailing list