[ubuntu/bionic-updates] flash-kernel 3.98ubuntu11~18.04.1 (Accepted)
Łukasz Zemczak
lukasz.zemczak at canonical.com
Mon Feb 3 08:49:54 UTC 2020
flash-kernel (3.98ubuntu11~18.04.1) bionic; urgency=medium
* Permit flash-kernel to workaround an inconsistent /boot directory when
triggered prior to the kernel finishing its triggers (LP: #1861292)
flash-kernel (3.98ubuntu10~18.04.1) bionic; urgency=medium
* SRU of 3.98ubuntu10 to support Raspberry Pi 4B. (LP: #1847587)
* Removed new entries from db/all.db for machines that were not already
supported on Bionic
* Remove "quiet splash" from kernel command line options; Bionic shipped
without these options and we shouldn't change the boot experience for
existing users
* Ensure the "overlays" dir always exists on the boot partition; the Bionic
image for the Pi 2 shipped without this dir
flash-kernel (3.98ubuntu10) focal; urgency=medium
* Always run flash-kernel on install/upgrade
flash-kernel (3.98ubuntu9) focal; urgency=medium
* Ensure overlays dir always exists
flash-kernel (3.98ubuntu8) focal; urgency=medium
* Add support for the Raspberry Pi 4 rev 1.2 board (LP: #1854487)
flash-kernel (3.98ubuntu7) focal; urgency=medium
* Add systemd depends, as systemd-detect-virt is called in the scripts.
flash-kernel (3.98ubuntu6) focal; urgency=medium
* Remove redundant DTB-Kernel-Version field
* Remove redundant copying of boot dtb
* Fix mkimage_kernel tests
* Add "pi" value for the "Method" field which copies all dtbs and overlays
to the boot partition and provides defaults for the boot paths of the
kernel, initrd, and u-boot script. This fixes upgrades to support the Pi 4
on Bionic (LP: #1850678)
* Update pi bootscript to support all flash-kernel vars, including
calculated devtype and partition for future USB boot support
* Add entry for Raspberry Pi 3A+ (LP: #1841955)
flash-kernel (3.98ubuntu5) eoan; urgency=medium
* Fix AARCH64 qcom laptop names, to those accepted upstream and in the
Ubuntu kernel. LP: #1847594
flash-kernel (3.98ubuntu4) eoan; urgency=medium
* Add support for Raspberry Pi 4 (LP: #1847587)
flash-kernel (3.98ubuntu3) eoan; urgency=medium
* Add support for AAarch64 Qualcomm laptops.
flash-kernel (3.98ubuntu2) eoan; urgency=medium
* Merge all RPi bootscripts into one unified bootscript which handles all Pi
architectures
* Remove uboot.env case which was only used for RPi2 (now supported by the
unified RPi bootscript)
flash-kernel (3.98ubuntu1) eoan; urgency=medium
* Merge with Debian unstable. Remaining changes:
- add "quiet splash" as default options to omap bootscr
- re-add support for the FLASH_KERNEL_SKIP env variable, so the image
build infrastructure has a chance to skip the automated flash-kernel run
during image builds.
- Also check for FLASH_KERNEL_SKIP to avoid setting up the root parameter
in case flash-kernel will not be used
- make the package postinst respect FLASH_KERNEL_SKIP
- make sure that if we dont want to override the bootloader root=
option by setting "Bootloader-sets-root: yes", we actually dont do it
- use umount -l in the cleanup function, else we fail while finishing up
with the script
- add a diversion for update-initramfs to live-installers
post-base-installer.d to avoid update-initramfs runs before flash-kernel
is configured
- add a check for the diverted update-initramfs to flash-kernel-installer,
so it gets reverted before we try to call update-initramfs
- make post-base-installer.d/01flash-kernel-diversion actually an
executable shell script
- enable UUID detection of the currently used root device
- if uEnv.txt is defined in the db for an arch, generate preEnv.txt from
UBOOT_DEFAULTS and UUID detection data
- make sure blkid only gives us the UUID and not any other metadata like
labels or filesystem
- hide the boot device from udisk's automounting after installation on all
systems using uEnv.txt to configure u-boot
- make sure we only rename the bootrom partition so udisks hides it,
when using mkdosfs for setting the label like we did in jasper (where
we cached the contents before doing this) MLO and u-boot.bin are gone
- make sure that /dev is bind mounted in /target when running
update-initramfs from flash-kernel-installer, else we do not find the
boot media (this is only a workaround, actual fixing of the netinst
environment is needed to fix this properly)
- drop the "|| true" from the initramfs building code, if we fail here we
actually dont want to attempt to flash that
- Do not run flash-kernel inside an LXC container
- Call systemd-detect-virt instead of the Ubuntu specific
running-in-container wrapper.
- Add generic-lpae to the XB-Subarchitecture list in debian/control
- debian/flash-kernel-installer.isinstallable: add arm*/generic-lpae
- Fix typo in dtb_kver test that made it break all non-dtb platforms.
- Apply patch from Paolo Pisati for appended DTB support
- Filter the selection of 'latest' usable kernel through the whitelist.
- Do not fail if there are no specified Kernel-Flavors for this machine.
- Allow us to find DTBs in both the old flat layout and the new vendor
subdirectory layout, so we keep backward compatibility
- Add support for installing dtb files in boot partition
- Add support for gzip-compressed kernel images
- db/all.db: add dummy entries as noops when running on VMs
- Add support for Calxeda Highbank
- Add support for Calxeda Highbank (with bootscr.highbank different from
Debian's version)
- bootscr.highbank: allow more space to load larger kernels
- Add support for Marvell ArmadaXP
- Re-add support for Marvell ArmadaXP
- Fix armadaxp kernel load address
- Add support for OMAP3 and OMAP4 boards
- add DB entry for "OMAP3 Beagle Board" (funnily thats missing)
- add Panda to the list of supported board in the README file
- debian/control: Re-add omap and omap4 to the flash-kernel-installer
XB-Subarchitecture field. These appear to have been lost somewhere
along the way.
- Also add omap and omap4 to flash-kernel-installer.isinstallable.
- switch omap3 and omap4 to uEnv.txt/preEnv.txt (the former holds all
active boot commands, the latter holds the kernel commandline only)
- switch omap3 and omap4 from Bootloader-sets-root: no to yes, we now
generate a root=UUID= line on the fly for arches using
uEnv.txt/preEnv.txt
- introduce bootscript/uEnvtxt.omap
- do not move the original uEnvtxt.omap to the target, use a copy
instead
- Add support for grouper boards
- add support for the grouper architecture
- Add support for Samsung Exynos 5440 platforms
- Add support for EXYNOS5440-based platforms
- Add support for HP ProLiant m400 and m800 cartridges
- Added support for HP ProLiant m800 Server Cartridge
- Add support for HP ProLiant m800 cartridges
- Set required boot arguments for HP ProLiant m800 cartridges
- Add support for HP ProLiant m400 Server Cartridges
- HP Moonshot Cartridges: Use $baudrate from u-boot environment as
serial console speed
- HP Moonshot Cartridges: Enable hardware flow control as required by
the HP moonshot chassis
- Enable U-Boot environment support for X-Gene platforms
- Use filesystem agnostic "load" command instead of assuming ext4
- Add a bootscript specific to X-Gene Mustang boards since they need to
pull their dtb from the OS.
- Add support for Wandboard Quad
- Wandboard: Use /dev/disk/by-path/platform-2198000.usdhc-part1
instead of the hardcoded mmcblk1p1, this should make things work on
boards with just a single microSD card in.
- Add basic support for WandBoard Quad.
- Add support for Raspberry Pi 2, 3, 3+, CM3, and CM3+
- Extend support for the RPi2 to actually install the kernel/initramfs
on the fat partition, and provide a uboot boot script based on the one
used for Snappy images.
- Extend functions to support generating uboot.env images, as an
alternative to boot.scr and uEnv.txt, and use this for RPi2 as well.
- Adjust the uboot.env.rpi2 to use the one Paolo Pisati has tested,
instead of trying to base on the Snappy one, which is failing to boot.
- Adjust the size of uboot.env based on empirical results on the rpi2.
- Adjust rpi2/3 dtb address from 0x100 to 0x02000000
- Support Raspberry Pi 2 Model B Rev 1.2
- Add Raspberry Pi 3 Model B+ to the db.
- Modify the Pi 3 boot.scr addresses to fit a bigger kernel, prepare
separate versions for armhf and arm64.
- Add Raspberry Pi Compute Module 3 and 3+ to the db.
- Add support for Nexus 4 (Mako)
- Enabling support for mako (Nexus 4)
- Add support for QCT APQ8064 CDP
- Add support for QCT APQ8064 CDP; thanks Alfonso Sanchez-Beato.
- Migrate default /etc/default/flash-kernel content to new default without
asking via debconf
- Update tests with new fields: Android-Skip-Initrd, Bootloader-sets-root,
DTB-Kernel-Version
- Look for dtbs in /lib/firmware/$kvers/device-tree/ in find_dtb_file()
- Add Bootloader-sets-root to Toshiba AC100 [previously undocumented]
- Install all potential uboot scripts [previously undocumented]
- initramfs-hook/flash-kernel: Pretend we're running from the kernel's
postinst to activate the same guard against mismatched kernel versions.
- flash-kernel/functions: Stop attempting to install the latest kernel
if we request an older version, just refuse to act without --force.
* Dropped changes merged in Debian:
- Remove commit-tmp cruft [previously undocumented]
* Dropped obsolete changes:
- Add archs (why?) and duplicate generic (why?!) in d/control [previously
undocumented]
flash-kernel (3.98) unstable; urgency=medium
[ Vagrant Cascadian ]
* Add machine db entry for Rock64 (Closes: #906696). Thanks to Josua
Mayer.
* Add machine db entry for Banana Pi M2 Berry (Closes: #923483). Thanks
to Lucas Nussbaum.
[ Cyril Brulebois ]
* Drop support for arm*/ixp4xx and arm*/iop32x; support for those
platforms was removed from the Linux kernel and therefore d-i.
[ Heinrich Schuchardt ]
* Provide db entry for the Pine A64 LTS board (Closes: #923655).
[ Jonas Smedegaard ]
* Add an entry for Olimex A64 Teres-I (Closes: #926071).
[ Vagrant Cascadian ]
* Add entries for Raspberry Pi 1, Pi Zero and Pi 3 Compute Module
(Closes: #921518). Thanks to Alexandre GRIVEAUX.
[ Updated translations ]
* Indonesian (id.po) by Muhammad Rifqi Priyo Susanto
* Vietnamese (vi.po) by Trần Ngọc Quân
flash-kernel (3.97) unstable; urgency=medium
[ Vagrant Cascadian ]
* Add machine db entry for Odroid HC1 (Closes: #916980). Thanks to
Benjamin Drung.
[ Karsten Merker ]
* Apply a patch from Hajo Noerenberg adding a machine db entry for
the Seagate Blackarmor NAS220 (Closes: #918193).
flash-kernel (3.96) unstable; urgency=medium
[ Helmut Grohne ]
* Support DEB_BUILD_OPTIONS=nocheck (Closes: #908355)
[ Karsten Merker ]
* Add a machine db entry for the Helios-4 NAS system,
provided by Josua Mayer. (Closes: #914016)
flash-kernel (3.95) unstable; urgency=medium
[ Heinrich Schuchardt ]
* Add a machine db entry for the Rockchip RK3288 Tinker Board.
(Closes: #895934)
[ Cyril Brulebois ]
* Update Vcs-{Browser,Git} to point to salsa (alioth's replacement).
[ Heinrich Schuchardt ]
* Update Firefly-RK3399 Board (Closes: #899091).
* Rockchip RK3399 Evaluation Board (Closes: #899090).
* Update entry for Marvell 8040 MACCHIATOBin (Closes: #899092):
- Add new Machine name.
- Update DTB path.
* Update Pine64+ (Closes: #899093).
* Update Raspberry Pi 3 Model B (Closes: #899096).
[ Josua Mayer ]
* Clearfog Pro: correct DTB name (Closes: #902432).
* Add missing entries for HummingBoard variants (Closes: #905962).
[ Vagrant Cascadian ]
* Add entries for additional Cubox-i models:
- SolidRun Cubox-i Dual/Quad (1.5som)
- SolidRun Cubox-i Dual/Quad (1.5som+emmc)
* Add entry for Raspberry PI 3 B+ (Closes: #905002).
Thanks to Johannes Keyser.
flash-kernel (3.94) unstable; urgency=medium
[ Vagrant Cascadian ]
* Fix typos in imx-base boot script.
[ Uwe Kleine-König ]
* Add Boot-DTB-Path-Version similar to Boot-Kernel-Path-Version.
flash-kernel (3.93) unstable; urgency=medium
[ Vagrant Cascadian ]
* Add support for Theobroma Systems RK3399-Q7 SoM.
flash-kernel (3.92) unstable; urgency=medium
[ Updated translations ]
* Hebrew (he.po) by Yaron Shahrabani
flash-kernel (3.91) unstable; urgency=medium
[ Vagrant Cascadian ]
* Make ubootenv.d work on CuBox-i. Thanks to Rainer Dorsch.
* Do not install flash-kernel.in.
[ Heinrich Schuchardt ]
* flash-kernel: Provide hook to start EFI application (Closes: #873390).
[ Vagrant Cascadian ]
* Add support for SolidRun Clearfog Boards (Closes: #839595). Thanks to
Christoph Egger and Joshua Mayer.
* Add support for SolidRun CuBox (dove) (Closes: #876773). Thanks to
Josua Mayer.
* Fix when no Kernel-Flavors are defined (Closes: #887803).
* Add Boot-Kernel-Path-Version and Boot-Initrd-Path-Version to be used
to append the version to the generated kernel/initrd images.
* debian/control: Set Rules-Requires-Root: no.
[ Heinrich Schuchardt ]
* flash-kernel: support relative paths for DTB-Id (Closes: #860304).
[ Vagrant Cascadian ]
* Add compatibility symlink to dtb in vendor sub-directory.
* Add support for root device specified by PARTLABEL.
[ Andre Heider ]
* Add support for multiple scripts sources
[ Vagrant Cascadian ]
* Convert Wandboard and CuBox-i to use a shared imx-base plus
uboot-generic boot script.
* Adjust sunxi boot script to prefer prefix variable if defined to set
the locations to search for boot files.
[ Updated translations ]
* Tajik (tg.po) by Victor Ibragimov
flash-kernel (3.90ubuntu5) disco; urgency=medium
* Add Raspberry Pi Compute Module 3 and 3+ to the db.
flash-kernel (3.90ubuntu4) disco; urgency=medium
* Add Raspberry Pi 3 Model B+ to the db.
* Modify the Pi 3 boot.scr addresses to fit a bigger kernel, prepare
separate versions for armhf and arm64.
Date: 2020-01-30 11:56:09.376986+00:00
Changed-By: Dave Jones <dave.jones at canonical.com>
Signed-By: Łukasz Zemczak <lukasz.zemczak at canonical.com>
https://launchpad.net/ubuntu/+source/flash-kernel/3.98ubuntu11~18.04.1
-------------- next part --------------
Sorry, changesfile not available.
More information about the Bionic-changes
mailing list